The AirTAC GC20006MF2 AirTAC F.R.L. Combination, PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled as one air-preparation set. This GC20006MF2 is the size 200 unit with a PT1/8 (1/8 in) port in PT thread. The filter element is the standard 40 um grade and the bowl has a manual drain, so an operator drains collected water by hand. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi) and carries the embedded square gauge, which on this code reads in psi. The lubricator feeds oil mist downstream to pneumatic tools and cylinders. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). Bowls on size 200 are PC (polycarbonate).
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of port, thread (PT standard, G and NPT as order options), drain type, filter grade (40 um standard, 5 um optional) and gauge scale. Rated flow for this series is published as curves rather than a single figure, so ask us to confirm the datasheet and sizing figures for your application on request.
| Model | GC20006MF2 AirTAC F.R.L. Combination, PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to the pneumatic clamps, tool-change cylinders and chip-clearing jets on a CNC machining centre, with the psi gauge giving the operator a direct read of set line pressure.
Sits at the drop of a packaging or bottling line to condition the air feeding stoppers, clamps and carton-eject cylinders, keeping water and debris out of the valves while the lubricator mist protects the cylinder seals.
Prepares the air supply for a bench assembly cell running impact drivers, riveters and air cylinders, holding a steady regulated pressure on the square gauge and oil-misting the tools through a working shift.
Start with the size and port: GC200 with a PT1/8 port is the entry step of the range; sizes 300, 400 and 600 step up in port and flow capacity, so match the size to the air demand of the circuit. Choose the drain to suit access: manual drain (this code) needs an operator to drain the bowl, while automatic and differential-pressure drains handle condensate without attention. Choose the filter grade: 40 um is standard for general air prep; the 5 um (W) element suits finer downstream needs. Gauge scale can be MPa, psi or bar, and an external round gauge is optional. Thread is PT as standard with G (BSPP) and NPT as order options; a mounting bracket is included.
Flow for this series is published as curves, not a single rated number, so we cannot quote one honestly here. Ask us to confirm the datasheet and check the sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so there is no honest one-number rating we can quote. Tell us your application and we will confirm the datasheet and check the sizing against your required flow before you order.
The M in GC20006MF2 specifies a manual drain: an operator opens the bowl drain by hand to remove collected water, which suits accessible mounting points or intermittent duty. The GC family is also available with automatic or differential-pressure drains if you would rather not rely on manual draining.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.