The AirTAC GC20006MF2G AirTAC F.R.L. Combination, G1/8, Manual Drain is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC20006MF2G is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one set, so one purchase covers water and particulate removal, pressure regulation and oil-mist lubrication. This 200-size unit has a G1/8 (BSPP) port, a manual drain on the filter bowl, a standard 40 um filter element, and a standard regulator with a 0.05-0.9 MPa (7-130 psi) adjustment range. The embedded square gauge is fitted with a psi scale, the polycarbonate bowls are rated for a maximum inlet pressure of 1.0 MPa (145 psi), and the unit operates from -5 to 70 C in non-freezing conditions.
This is a genuine AirTAC part. The GC family is published in 200, 300, 400 and 600 sizes with port options from 1/8 to 1 inch, PT as the standard thread and G or NPT as order options, plus choices of drain type, 5 um filtration (code W), gauge scale in MPa, psi or bar, and a reverse/check valve. Flow is published as curves rather than a single rated figure, so we confirm datasheet and sizing figures on request.
| Model | GC20006MF2G AirTAC F.R.L. Combination, G1/8, Manual Drain |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeding filtered, regulated and lubricated air to the cylinders and pneumatic clamps on a small manual assembly bench, with the psi gauge giving the operator a direct pressure readout at the station.
Conditioning the air feeding pneumatic vices and workholding fixtures on a machining centre, where the filter keeps swarf-laden moisture out of the clamping circuit and the lubricator protects the actuator seals.
Supplying the pneumatic sealers, diverters and pushers on a cartoning or wrapping line, with the three functions keeping the line's actuators clean, correctly pressurised and lubricated from a single point.
Step up through the 200, 300, 400 and 600 sizes as your flow demand and port size grow; this 200 unit takes a 1/8 in port in G (BSPP) thread, with PT as the standard thread and NPT available to order. The real choices on this code are the drain type (manual here, meaning the bowl is emptied by the operator; automatic and differential-pressure drains are alternatives on other codes), the filter grade (40 um standard versus 5 um with code W), and the gauge scale (MPa, psi or bar). Mounting bracket included. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for this family as curves rather than a single rated figure, so there is no one l/min or SCFM number we can quote honestly. The 200 size with its 1/8 in port is the smallest step in the GC range, and we will confirm the datasheet flow curve and check it against your application on request before you order.
The M in the code GC20006MF2G specifies a manual drain, meaning the filter bowl is emptied by an operator opening the drain rather than by an automatic mechanism. Automatic (code A) and differential-pressure (blank) drains are available on other codes in the family; manual suits points that are checked as part of a routine, while automatic draining removes the need for operator attention.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.