The AirTAC GC20006MF2K AirTAC F.R.L. Combination, PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC20006MF2K is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply package. This configuration is size 200 with PT1/8 ports (PT is the standard thread; G and NPT are order options). The filter removes water and particulate to the standard 40 um grade, the manual-drain bowl collects condensate for periodic draining, and the lubricator meters oil mist into the air line. The regulator is the standard type with a 0.05-0.9 MPa (7-130 psi) adjustment range, monitored on the embedded square gauge with psi scale, and a reverse/check valve is fitted to hold downstream settings.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in, and options including automatic or differential-pressure drains, a 5 um filter element (code W), alternative gauge scales and G or NPT threads. Flow is published as curves rather than a single rated figure, so we confirm flow and datasheet figures on request before you order.
| Model | GC20006MF2K AirTAC F.R.L. Combination, PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
A machine-builder can feed a bench-mounted pneumatic press or clamping fixture from this unit: filtered, regulated and lubricated air in one supply, with the check valve helping hold the set pressure between cycles.
On a factory air ring main, a GC200 unit at each take-off gives individual workstations clean, regulated, lubricated air, with the manual drain emptied during routine rounds.
Packaging lines and conveyor diverters driven by small pneumatic cylinders can run from this combination, where the lubricator keeps cylinder and valve seals working and the 40 um filter protects the directional valves.
Start with the size and port step: 200 through 600 covers 1/8 in to 1 in ports, and the right step depends on the air consumption of the downstream circuit - ask us to check the published flow curve against your demand rather than guessing. Then choose the drain: this unit has a manual drain, while automatic and differential-pressure drains are available if you cannot rely on periodic draining. Filter grade is 40 um standard with a 5 um element (code W) where finer filtration is needed. Gauge scale is selectable (MPa, psi or bar) and this unit carries the square psi gauge. Thread is PT as standard; order G (BSPP) or NPT where your piping requires it. Flow is published as curves, not a single rating, so confirm sizing with us against the application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Tell us your port size and air demand and we will confirm the flow and datasheet figures on request before you order.
The M in GC20006MF2K means the filter bowl has a manual drain: condensate collects in the bowl and is drained by hand at intervals. If the installation is not visited regularly, the same unit can be ordered with an automatic drain (code A) or a differential-pressure drain (blank), which handle condensate without manual attention.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.