The AirTAC GC20006MF2W AirTAC F.R.L. Combination, PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC20006MF2W is a three-piece AirTAC GC series F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one unit. This configuration is built for a 1/8 in PT port, uses a manual drain on the filter bowl, carries the fine 5 um filter element (the W grade, against the 40 um standard), and is fitted with an embedded square gauge reading in psi. In use it cleans water and particulate from the compressed air, holds downstream pressure at your set point within the 0.05-0.9 MPa (7-130 psi) adjustment range, and adds a controlled oil mist to extend the life of downstream pneumatic actuators and valves.
This is a genuine AirTAC part. The GC combination is available in sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and with choices of drain type, filter grade, gauge scale and thread (PT standard, G and NPT as order options). Flow figures for this series are published as curves rather than a single rated number, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GC20006MF2W AirTAC F.R.L. Combination, PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Filtered, regulated and lubricated air for the pneumatic clamps and tool-change cylinders on a machining centre, with the 5 um element protecting close-tolerance valves.
A single supply point feeding the air cylinders that push, divert and seal cartons on a packaging conveyor, keeping moisture out and oil mist in for long cylinder life.
Conditioned air for hand-held pneumatic tools and bench fixtures at an assembly workstation, with the regulator set to the tool's rated pressure and read on the psi gauge.
Start with the size and port: the 200 series with its 1/8 in PT port suits compact circuits, while stepping up to 300, 400 or 600 gives larger ports for higher air demand - match the step to the flow your circuit needs. This unit has a manual drain, which means an operator opens the bowl drain periodically; if you prefer automatic or differential-pressure draining, those are available in the range. The 5 um element here is the finer filtration choice for sensitive downstream components; the 40 um standard grade suits general circuits. The square gauge is fitted in psi; MPa and bar scales, an external round gauge, and G or NPT threads are selectable options, and a mounting bracket is included. Because flow for this series is published as curves and not as a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote one number. Tell us your application and required flow, and we will confirm the sizing from the datasheet on request before you order.
The M code in GC20006MF2W specifies a manual drain: the filter bowl is emptied by hand at intervals. The GC range also offers automatic drains and the differential-pressure drain as the default, so choose manual where drains are checked routinely and automatic or differential where the unit is not easily reached.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.