The AirTAC GC20006MLC2 AirTAC F.R.L. Combination, PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC20006MLC2 is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-treatment set. It cleans compressed air by removing water and particulate down to 40 um, regulates downstream pressure with its low-pressure type regulator, and adds oil-mist lubrication for downstream tools and cylinders. This 200-size unit is ported PT1/8 (1/8 in, PT thread standard; G and NPT are order options). The filter bowl is manual-drain polycarbonate (PC), the set carries a round external gauge with a psi scale, and a mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of ports, drain types, filter grades (40 um standard, 5 um with code W), gauge styles and scales, and thread options. Flow is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GC20006MLC2 AirTAC F.R.L. Combination, PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeding spray guns on a woodshop finishing line, where the filter strips water and chips, the low-pressure regulator holds a gentle gun pressure, and the lubricator keeps gun triggers and needles working smoothly.
Conditioning the supply to compact pneumatic gripper cylinders on an assembly cell: clean, moisture-reduced air, reduced regulated pressure for delicate handling, and oil mist for cylinder seal life.
Treating the air feeding carton-sealer and labelling-head cylinders on a packaging line, where the manual-drain bowl is emptied at shift checks and the psi gauge gives operators a readable setpoint.
Start with the port step: this 200-size unit is PT1/8; larger sizes (300/400/600) open up to bigger ports and more flow, so size up if your circuit draws more air than a 1/8 in line comfortably serves. The filter here is the 40 um standard grade; choose the W option (5 um) if downstream valves or instruments need finer filtration. The bowl is manual-drain, so plan a routine drain check; automatic or differential-pressure drain versions are available in the family if you would rather not rely on manual draining. The fitted gauge is the external round type on a psi scale; square embedded gauges and MPa or bar scales are the other catalogue choices. Thread is PT as standard, with G (BSPP) and NPT orderable. A mounting bracket is included. Because flow is published as curves rather than one rating, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a number here. Tell us your line pressure and the air demand of your equipment, and we will confirm the flow figures from the datasheet for this exact unit on request.
The M in GC20006MLC2 specifies a manual-drain filter bowl: condensate collects in the PC bowl and is drained by hand, which suits stations that are checked regularly. The GC family also offers automatic and differential-pressure drain options if you prefer not to rely on manual draining.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.