The AirTAC GC20006MLC2G AirTAC F.R.L. Combination, G1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply unit. This GC20006MLC2G is the size 200 configuration with a G1/8 (BSPP) port. The filter element is the standard 40 um grade with a manual drain bowl in polycarbonate, the regulator is the low-pressure type and is fitted with an external round gauge scaled in psi, and the lubricator mists oil into the downstream air for tool and cylinder life. A mounting bracket is included, and the maximum inlet pressure is 1.0 MPa (145 psi) with a working temperature range of -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 up to 1 inch, and with choices of thread (PT standard, G or NPT to order), drain type (differential-pressure, automatic or manual), filter grade (40 um standard, 5 um optional) and gauge style and scale. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GC20006MLC2G AirTAC F.R.L. Combination, G1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
On a robotic pick-and-place cell fed by small-bore cylinders and vacuum ejectors, this G1/8 three-unit combination cleans water and particulate from the supply, holds a stable low regulated pressure at the gripper circuit and adds oil mist for the cylinder seals - all from one bracket-mounted point of use.
Fitted at the air drop feeding a cartoning or wrapping machine's pilot valves and small actuators, the filter keeps condensate and 40 um-plus particles out of the valves, the low-pressure regulator matches the supply to the machine's rated pressure, and the lubricator conditions the air for long cylinder service.
At a workshop bench running impact wrenches, ratchets and air ratchets off a 1/8-inch branch, this unit filters the shop supply, regulates it down to the tool manufacturer's working pressure on the psi gauge, and lubricates the air so the tools' vane motors stay oiled through the shift.
Start with the size and port: the 200 series with its G1/8 port suits the smallest branch lines, while 300, 400 and 600 step up in port and flow capacity - match the step to the air demand of the circuit rather than oversizing on guesswork. Because this is a combination unit, the choices cascade across all three pieces: drain type (manual here; automatic or differential-pressure are alternatives on other codes), filter grade (40 um standard, 5 um with the W code where finer particulate removal is needed), gauge style and scale (this code carries the external round gauge in psi; embedded square gauges and MPa or bar scales are the other options), and thread (PT is the standard; G and NPT are order options - this code is specified in G/BSPP). A mounting bracket is included.
One honest routing note: AirTAC publishes flow for this family as curves, not as a single rated number, and the exact regulation range of the low-pressure type is not stated on the sheet we work from. Before ordering, ask us to confirm the flow curve and the regulator range against your line pressure and consumption so the unit is sized correctly.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Send us your line pressure and the air consumption of the equipment it will feed, and we will confirm the flow curve and sizing from the datasheet on request before you order.
The L in the code selects the low-pressure regulator variant, intended for circuits that run below the standard regulator's range; its exact adjustment range is not published on our sheet, so ask us to confirm it for your set pressure. The M selects a manual drain: condensate in the filter bowl is drained by hand rather than automatically, which suits points of use that are attended regularly. The C2 adds the external round gauge scaled in psi, and the trailing G specifies the G (BSPP) thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.