The AirTAC GC20006MLF2K AirTAC F.R.L. Combination, PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC series is a three-unit F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator, assembled as one coordinated set that cleans, regulates and lubricates compressed air at the point of use. This configuration, GC20006MLF2K, is the size 200 unit with a PT1/8 (1/8 in) PT-threaded port. It carries a 40 um standard filter element with a manual drain, a low-pressure type regulator fitted with an embedded square gauge scaled in psi, and a reverse/check valve. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). The bowls on the size 200 filter and lubricator are PC (polycarbonate), and a mounting bracket is included.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600, with port sizes stepping up from 1/8 in to 1 in, and options including automatic or differential-pressure drains, a 5 um filter element (code W), gauge scales in MPa, psi or bar, and G (BSPP) or NPT thread variants to order. Flow is published in the catalogue as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing figures for your application on request.
| Model | GC20006MLF2K AirTAC F.R.L. Combination, PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeding a compact bench-mounted pneumatic press or clamping fixture, where the FRL set strips water and swarf from the shop air, holds a steady low regulated pressure on the ram circuit and mists oil to keep cylinder seals and valves lubricated through repeated cycles.
Conditioning the supply to a small assembly or pick-and-place cell with air cylinders and grippers: clean, dry, correctly regulated air protects the directional valves, while the lubricator extends the life of the actuators running all shift.
Supplying air to diverters, pushers and bag-seal cylinders on a packaging or bottling line, where the manual-drain filter bowl is bled at shift checks, the low-pressure regulator is set to the machine's specified pressure, and the lubricator keeps the moving parts working in a dusty environment.
Start with the size and port: the 200 frame with a PT1/8 port suits the smaller end of the range, and stepping up to 300, 400 or 600 buys larger ports and more flow capacity - match the step to the air demand of the circuit rather than oversizing blindly. Drain type is a real choice here: this unit has a manual drain, which needs someone to bleed the bowl; choose automatic or differential-pressure drain codes if the installation is unattended. The 40 um element is the standard grade; specify the 5 um W option where downstream equipment needs finer filtration. The embedded square gauge is fitted here with a psi scale, and MPa or bar scales plus an external round gauge are alternatives. Thread is PT as standard, with G (BSPP) and NPT available as order options, and a mounting bracket is included.
One honest note on sizing: AirTAC publishes flow for this series as curves, not as a single rated number, so we cannot quote a rated flow figure here. Send us your application details and we will confirm the sizing against the datasheet curves before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as performance curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number for this unit. Tell us your application - the air demand and working pressure - and we will confirm the sizing against the datasheet curves on request before you order.
The M in the code GC20006MLF2K specifies a manual drain on the filter bowl, meaning accumulated water is bled off by hand at maintenance checks. If the installation runs unattended, the same size 200 combination can be ordered with an automatic drain (code A) or a differential-pressure drain (blank), which removes water without operator intervention.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.