The AirTAC GC20006MLF2W AirTAC F.R.L. Combination Unit, PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC200 is AirTAC's three-piece F.R.L. combination: a filter, a pressure regulator and an oil-mist lubricator assembled as one air-preparation set. This GC20006MLF2W is built with a PT1/8 (1/8 in) port on PT thread, a 5 um filter element (code W, finer than the 40 um standard), a manual drain on the filter bowl, a low-pressure regulator fitted with an embedded square gauge scaled in psi, and a mounting bracket included. The polycarbonate bowls suit the 200 size; only the 600 size uses aluminium alloy bowls. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC series spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, and options across the family for automatic or differential-pressure drains, 40 um or 5 um filtration, MPa, psi or bar gauge scales, PT, G or NPT threads, and a reverse/check valve. Flow is published as curves rather than a single rating, so ask us to confirm sizing and the low-pressure regulator's adjustment range against your application before ordering.
| Model | GC20006MLF2W AirTAC F.R.L. Combination Unit, PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Conditioning the air feeding clamps and actuator cylinders on a machining centre: the 5 um element strips water and fine particulate before the valves, the low-pressure regulator holds the reduced pressure the fixture circuit is set up for, and the psi gauge gives operators a readable setpoint.
Supplying filtered, regulated and lubricated air to the cylinders and grippers along a packaging conveyor. The manual drain is emptied as part of shift checks, and the included bracket lets the set mount directly to the machine frame.
A compact three-in-one set for workshop benches where hand-held pneumatic tools are used: filtration ahead of the tools, a low-pressure regulator with a square psi gauge for setting the bench supply, and oil-mist lubrication to keep tool operation smooth.
Size and port step up together: 200 with PT1/8 is the smallest step in the GC range, and the right size depends on the air your circuit consumes - we confirm sizing against the catalogue flow curves on request. The decodable choices on this unit are: manual drain (emptied by hand; automatic and differential-pressure drains are available in the family), 5 um filtration instead of the 40 um standard, a square gauge scaled in psi (MPa and bar scales exist), the low-pressure regulator type (L code; its exact adjustment range is not published, so confirm it with us), and PT thread with G and NPT available to order. A mounting bracket is included.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and sizing from the datasheet for the GC200 at PT1/8 before you order.
L marks the low-pressure regulator type. The exact adjustment range of this low-pressure version is not published in the material we hold, so please confirm it with us on request. The rest of the code decodes as: PT1/8 port, manual drain (M), square gauge (F) scaled in psi (2), and 5 um filtration (W).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.