The AirTAC GC20008F2W AirTAC F.R.L. Combination, PT1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC20008F2W is a three-piece AirTAC GC air-treatment combination: a separate filter, regulator and lubricator assembled as one F.R.L. unit. The filter element removes water and particulate down to 5 um (the finer W grade, instead of the standard 40 um), the regulator holds downstream pressure within its 0.15-0.9 MPa (20-130 psi) adjustment range, and the lubricator adds oil mist for downstream air tools and cylinders. It is built for 1/4 in PT ports, carries a maximum inlet pressure of 1.0 MPa (145 psi), and operates from -5 to 70 C in non-freezing conditions. The filter and lubricator bowls are polycarbonate (PC) at this size, the drain on the filter is differential-pressure type, and the regulator is fitted with an embedded square gauge reading in psi.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with matching port sizes, and options include thread variants (G or NPT in place of the PT standard), a 40 um or 5 um filter element, automatic or manual drains, gauge scale in MPa, psi or bar, and a reverse/check valve. Published flow data appears as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GC20008F2W AirTAC F.R.L. Combination, PT1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Feeding clean, regulated and lubricated air to a machining centre's clamping fixtures and tool-change cylinders, where the 5 um element protects fine pilot valves from water and swarf.
Supplying the pick-and-place cylinders and diverters on a carton packing line, with the regulator holding a steady working pressure so case-ejector strokes stay consistent through the shift.
Conditioning the shop-air feed to impact wrenches, ratchets and spray guns at a vehicle service bench, with the lubricator carrying oil mist to keep the tools running smoothly.
Start with the size and port: this GC200 unit is the 200 size with 1/4 in PT ports, the smallest step in the range, so size up to GC300/400/600 if your line draws more air than a 1/4 in supply can carry. Choose the drain to suit access: this unit uses the differential-pressure drain (the default), while automatic (A) or manual (M) versions can be ordered. The 5 um element fitted here suits finer air-quality needs; the standard 40 um element is available if coarse protection is enough. The fitted square gauge reads in psi; MPa or bar scales and an external round gauge are alternatives, and G or NPT threads can be ordered in place of PT.
Flow for this family is published as curves, not as a single rated number, so we cannot quote a rated flow here. Send us your application details and we will confirm the sizing against the datasheet curves before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a rated flow number. Tell us your application and we will confirm the relevant datasheet flow-curve figures for you on request before you order.
The W in the code GC20008F2W selects the optional 5 um element instead of the 40 um standard, giving finer removal of water and particulate for sensitive downstream valves and tools. If your application only needs coarse protection, the 40 um version of the same GC200 unit can be ordered instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.