The AirTAC GC20008LC2 AirTAC F.R.L. Combination Unit, PT1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC20008LC2 is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one air-preparation set. This size 200 configuration has PT1/4 (1/4 in) ports, a 40 um filter element, a differential-pressure drain on the filter bowl, a low-pressure type regulator, and a round pressure gauge with a psi scale. The polycarbonate bowls suit standard duty, a mounting bracket is included, and the set handles compressed air at up to 1.0 MPa (145 psi) inlet with an operating temperature of -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600, with port options from 1/8 in to 1 in, G (BSPP) or NPT threads to order, 5 um filtration as an option, automatic or manual drains, gauge scale choices and bracket variations. Flow is published as curves rather than a single rated figure, so we confirm flow and datasheet figures on request before you order.
| Model | GC20008LC2 AirTAC F.R.L. Combination Unit, PT1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to impact drivers, nut runners and riveters on a bench or cell assembly line, keeping tools lubricated and set pressure stable across a shared 1/4 in drop.
Conditions the air feeding cylinders and grippers on a cartoning or case-packing conveyor, removing water and particulate ahead of valves while holding a low set pressure for gentle product handling.
Installed at a point-of-use drop on a plant compressed-air ring main, giving a work station clean, regulated and oil-misted air for clamps, air tables and small actuators without a separate filter set.
Size 200 with PT1/4 ports is the entry step of the GC range; step up to 300, 400 or 600 when the application needs larger ports and more flow. Choose the drain type for the filter bowl: differential-pressure (as fitted here) drains on pressure drop, automatic drains hands-free, and manual drains on demand. The 40 um element is the standard grade; specify 5 um (code W) where finer particulate removal matters. This unit is the low-pressure regulator type, suited to circuits that work at reduced set pressures - confirm the exact adjustment range with us before ordering. The round gauge reads in psi; MPa and bar scales are also available. Thread is PT as standard, with G (BSPP) and NPT as orderable options, and the mounting bracket is included.
Because flow is published as curves and not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote one number. Tell us your inlet pressure and the flow your application needs, and we will confirm the correct size against the datasheet curves on request before you order.
The L in GC20008LC2 marks the low-pressure type regulator, intended for circuits that operate at reduced set pressures rather than full line pressure. The exact adjustment range for the low-pressure type is not published in the standard sheet, so confirm your required set pressure with us and we will verify suitability on request. The round gauge fitted here reads in psi; MPa or bar scales can be ordered instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.