The AirTAC GC20008LF2 AirTAC F.R.L. Combination, PT1/4, Low-Pressure is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC20008LF2 is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply unit. This configuration is size 200 with PT1/4 ports, a 40 um standard filter element, and a differential-pressure drain on the filter bowl. The regulator is the low-pressure type, so it is intended for circuits that must hold a reduced, stable supply pressure below the range a standard regulator targets - confirm the exact adjustment range with us before ordering. The pressure gauge is the embedded square type with a psi scale, and the filter and lubricator bowls on this size are polycarbonate. A mounting bracket is included.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of ports, thread options (PT standard, G and NPT to order), drain types, 40 um or 5 um filtration, gauge scale and low-pressure or standard regulation. Flow figures are published as curves rather than a single rating, so we confirm the datasheet and sizing for your application on request.
| Model | GC20008LF2 AirTAC F.R.L. Combination, PT1/4, Low-Pressure |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to a bench or cell press with air-operated clamps, where the low-pressure regulator holds a reduced, stable working pressure for the fixture circuit.
Serves as the single point-of-use supply unit on packaging lines, cleaning the air, holding set pressure for sealing and actuation cylinders, and oil-mist lubricating the machine's air cylinders.
Installed at the drop of a plant air header to condition supply for a small assembly cell of air tools and cylinders, with the psi gauge giving operators a local pressure readout.
Start with the size and port: 200 is the smallest GC frame, and stepping up to 300, 400 or 600 increases both the port and the flow capacity, so match the frame to the air demand of the circuit rather than the port alone. Choose the drain type for the filter bowl - differential-pressure (fitted here), automatic, or manual - based on how often the installation is attended. Choose 40 um for general supply air or the 5 um (W) element where finer filtration is wanted. Pick the gauge scale (MPa, psi or bar; this unit is psi) and the thread: PT is the standard, with G (BSPP) and NPT as orderable options.
Be honest about sizing: flow is published as curves, not a single rated figure, and the low-pressure regulator's exact adjustment range is not in the published table, so ask us to confirm both against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a rated flow number. Send us your application's air demand and working pressure and we will confirm the correct size and the datasheet flow curve on request.
The L in the code means the regulator section is the low-pressure type, intended for circuits that hold a reduced supply pressure below what a standard regulator targets. The exact adjustment range for this variant is not in the published table, so confirm it with us on request. Everything else decodes normally: PT1/4 ports, 40 um element, differential-pressure drain and a square psi gauge.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.