The AirTAC GC20008LF2G AirTAC F.R.L. Combination, G1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC20008LF2G is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled as one 3-piece set for a G1/4 (1/4 in) port. This configuration carries the 40 um standard filter element with a differential-pressure drain on the filter bowl, a low-pressure type regulator, and a factory-fitted embedded square gauge reading in psi. The bowls on the 200 size are polycarbonate (PC), and the set includes a mounting bracket. Maximum working (inlet) pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC series is available in 200, 300, 400 and 600 sizes with port options from 1/8 in to 1 in, thread options PT (standard), G and NPT, drain choices (differential-pressure, automatic or manual), a 5 um filter element option (code W), gauge scale choices and a reverse/check valve option. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GC20008LF2G AirTAC F.R.L. Combination, G1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Cleaning, regulating and lubricating the shop-air feed to a machining centre's pneumatic tool-changer and clamping circuits, with the psi gauge giving operators a visible setpoint at the machine.
Conditioning the air feeding conveyor stoppers, pushers and carton-closing cylinders on a packaging line, where the lubricator keeps cylinder and valve seals working smoothly shift after shift.
A point-of-use F.R.L. set at a bench or assembly cell, filtering water and particulate from the drop line, holding a stable low-pressure setting for delicate air tools and misting the downstream air.
Start with the size and port step: the 200 size at G1/4 (1/4 in) suits lighter-duty circuits, while 300, 400 and 600 sizes step up in port and flow capacity - match the size to the air demand of the downstream equipment. The 40 um element is the standard grade; specify the 5 um option (code W) if finer particulate removal is needed. The differential-pressure drain bleeds the bowl automatically as flow passes; automatic (A) and manual (M) drains are orderable alternatives. The fitted square gauge reads in psi; MPa and bar scales are available, and an external round gauge is an option.
Thread here is G (BSPP); PT is the catalogue standard and NPT is an orderable option - choose to match your fittings. A mounting bracket is included with this set. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated number, so we do not quote a rated flow figure. Tell us your application and operating pressure and we will confirm the flow and sizing from the datasheet on request before you order.
This set's filter bowl uses a differential-pressure drain, which bleeds accumulated condensate automatically as air flows through, with no operator action. If you prefer, the GC series can be ordered with an automatic drain (code A) or a manual drain (code M); the regulator's adjustment range depends on the drain type, so confirm the exact low-pressure range with us for your configuration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.