The AirTAC GC20008MC2WG AirTAC F.R.L. Combination, G1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC20008MC2WG is an AirTAC GC200 three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-preparation set. This configuration is built around a G1/4 (BSPP) port, a 5 um filter element (the finer of the two catalogue grades), a manual drain on the filter bowl, and a fitted round pressure gauge reading in psi. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi), and the maximum inlet pressure is 1.0 MPa (145 psi). The bowls on the filter and lubricator sections are polycarbonate (PC), and a mounting bracket is included.
This is a genuine AirTAC part. The GC family is published in sizes 200, 300, 400 and 600, with port sizes from 1/4 in upward, a choice of drain types, 40 um standard or 5 um (W) filter elements, gauge styles and scales, and PT, G or NPT threads. Flow for this series is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures against your application.
| Model | GC20008MC2WG AirTAC F.R.L. Combination, G1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Spray guns and finishing equipment need air that is dry, held at a steady set pressure and lightly oiled. The filter section strips water and 5 um particulate, the regulator holds the gun pressure, and the lubricator mists oil into the line - one G1/4 set feeding the booth.
Carton sealers, case packers and labelling heads run cylinders continuously through a shift. A single F.R.L. set at the machine inlet keeps water out of the valves, pins the working pressure against supply swings, and carries oil mist to the cylinders.
Impact wrenches, grinders and air ratchets on a shop drop last longer on filtered, regulated, lubricated air. This G1/4 three-unit set mounted at the drop point gives the technician a psi gauge to set and a manual drain to bleed at the end of the day.
Start with the size and port: the 200 size with its 1/4 in port suits the smaller end of the range, and the next steps (300, 400, 600) add port size and flow capacity - match the step to the air demand of the circuit rather than oversizing by habit. Choose the drain to suit access: this unit has a manual drain, which needs someone to bleed the bowl; automatic or differential-pressure drains are available if the installation is unattended. The 5 um element fitted here is the finer grade; the 40 um standard element is the choice where only coarse water and particulate removal is needed. Gauge style (embedded square or external round) and scale (MPa, psi or bar) are selectable, as is thread: PT is the standard, with G (BSPP) and NPT as catalogue options - this unit is ordered with G thread. A bracket is included.
One honest note before you order: flow for this series is published as curves, not a single rating, so send us your air demand and we will confirm sizing against the datasheet before you commit.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated number, so we do not quote a figure here. Tell us your air demand and line conditions and we will confirm the correct size from the datasheet on request - that is the reliable way to size it.
A manual drain means someone bleeds accumulated water from the filter bowl, which suits attended installations or daily shutdown routines. If the set will sit on an unattended line, the catalogue also offers automatic and differential-pressure drain options on the same family - we can quote the variant that fits.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.