The AirTAC GC20008MF2GK AirTAC F.R.L. Combination, G1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC20008MF2GK is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one conditioning stack. This 200-size unit is set up for G1/4 (BSPP) ports, manual bowl drains, the standard 40 um filter grade, an embedded square gauge with a psi scale, and a reverse/check valve fitted on the regulator. It filters water and particulate from compressed air, holds a steady downstream pressure you set between 0.05 and 0.9 MPa (7-130 psi), and adds a fine oil mist to keep downstream air tools and cylinders lubricated. Maximum inlet pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C (non-freezing). The bowls on this size are polycarbonate (PC); manual drains mean you vent each bowl by hand, which suits installations checked on a regular maintenance round.
This is a genuine AirTAC part. The GC family spans 200, 300, 400 and 600 sizes with port options from 1/8 to 1 inch, G/NPT thread variants, automatic or differential-pressure drains, a 5 um (W) filter grade, gauge scale choices in MPa/psi/bar, and a low-pressure regulator type. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC20008MF2GK AirTAC F.R.L. Combination, G1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
A workbench-mounted FRL stack feeding a small pneumatic press: the filter removes water and scale from shop air, the regulator holds the set clamping pressure steady, and the lubricator mists oil to the cylinder seals and valve. The check valve holds downstream pressure if the supply dips.
Conditioning the 1/4-inch branch that feeds diverting and pusher cylinders on a carton conveyor. The 40 um element protects the directional valves, the psi gauge gives operators a visible setpoint, and the lubricator extends cylinder and O-ring life in continuous duty.
A three-unit stack mounted in a fleet maintenance truck or workshop bay ahead of impact wrenches and air ratchets. The filter strips compressor moisture, the regulator caps tool inlet pressure at a safe setting, and the oil mist keeps the tools running smoothly through the shift.
Start with the port and flow step: 200 size with G1/4 ports is the entry step of the GC range, so if your line draws more air than a 1/4-inch circuit can carry, step up to GC300/400/600. Drain type is a real choice here: this unit has manual drains (code M), which are simple and cheap but rely on someone draining the bowls; choose automatic (A) or differential-pressure (blank) versions for unattended duty. The standard 40 um element suits general plant air; specify the W option for 5 um filtration where finer protection is needed. The fitted square gauge reads in psi; MPa and bar scales and an external round gauge are alternatives. G (BSPP) thread is the specification here - PT is the standard and NPT is a catalogue option to order. A mounting bracket is included, and the K code means a reverse/check valve is already fitted. Because flow is published as curves, not a single rating, send us your air demand and let us confirm the sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated number, so we do not quote a rated flow, Cv or SCFM figure for this unit. Send us your air demand and line conditions and we will confirm the datasheet flow curve and check the sizing against your application before you order.
The M code in GC20008MF2GK means both bowls are drained by hand, which suits stations visited on a regular maintenance round. If the unit will run unattended, order the A version for automatic drains or the blank-drain version for differential-pressure draining - all three are catalogue options in the same 200 size.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.