The AirTAC GC20008MF2W AirTAC F.R.L. Combination, PT1/4, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC20008MF2W is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one 3-piece set, so compressed air is filtered (water and particulate removal), regulated to a set working pressure, and lubricated with an oil mist before it reaches your actuators and tools. This unit is the 200 size with a PT1/4 (1/4 in) PT thread. It carries the W 5 um filter element (finer than the 40 um standard), a manual drain on the filter bowl, a standard regulator with a 0.05-0.9 MPa (7-130 psi) adjustment range, and a fitted embedded square gauge scaled in psi. The polycarbonate bowls suit this size, and a mounting bracket is included.
This is a genuine AirTAC part. The GC family is available in 200, 300, 400 and 600 sizes covering ports from 1/8 in to 1 in, with options including 40 um or 5 um filtration, manual, automatic or differential-pressure drains, gauge scale in MPa, psi or bar, and G (BSPP) or NPT threads as order options. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GC20008MF2W AirTAC F.R.L. Combination, PT1/4, 5 um |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Feeding filtered, regulated and lubricated air to the pneumatic clamps, tool-change cylinders and chip-clearing blasts on a machining centre, where the 5 um element protects fine pilot valves from particles and water.
Supplying the diverters, sealers and pusher cylinders on a packaging conveyor, with the regulator holding a stable working pressure so cycle behaviour stays consistent through the shift.
A point-of-use F.R.L. at an assembly bench, conditioning the air for air screwdrivers, riveters and small cylinders, with the lubricator keeping the tools running smoothly.
Start with the port and size step: this unit is 200 size at PT1/4, and the GC range steps up through 300, 400 and 600 for larger ports and higher air demand - pick the size from your line's air consumption, then confirm it against the published flow curves before ordering. Filtration here is the 5 um W element; choose it when downstream valves and cylinders need finer protection than the 40 um standard element provides. The manual drain means an operator opens the drain periodically to discharge collected condensate - if nobody will do that routinely, consider the automatic or differential-pressure drain options instead. The fitted square gauge reads in psi; MPa and bar scales are available, and an external round gauge is optional. PT thread is standard on this model; G (BSPP) and NPT are order options. A mounting bracket is included.
Because flow is published as curves rather than a single rated number, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a rated flow number. Send us your application - working pressure and air consumption - and we will confirm the flow and sizing against the datasheet before you order.
The M in the code means the filter bowl has a manual drain: condensate collects in the polycarbonate bowl and an operator opens the drain to discharge it. It suits lines with regular maintenance visits. If the unit will be left unattended, the automatic or differential-pressure drain options are the better choice - ask us about them when ordering.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.