The AirTAC GC20008MLC2WG AirTAC F.R.L. Combination Unit, G1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC200 is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled into one supply unit that cleans, regulates and lubricates compressed air before it reaches downstream equipment. This configuration GC20008MLC2WG is the size 200 unit with a G1/4 (BSPP) port, a 5 um filter element for finer water and particulate removal, a manual drain on the filter bowl, a low-pressure type regulator, an external round gauge reading in psi, and a mounting bracket included.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600, with port options, drain types (differential-pressure, automatic or manual), 40 um standard or 5 um (W) filter grades, gauge styles and MPa/psi/bar scales, and PT, G or NPT threads. Max inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing figures for your application on request.
| Model | GC20008MLC2WG AirTAC F.R.L. Combination Unit, G1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to the pneumatic clamps, tool-changer cylinders and coolant-spray actuators on a machining centre, protecting spindles and fixtures from water and debris in the shop air line.
Conditions the air feeding the lift, push and seal cylinders on a carton packaging conveyor, so actuators receive clean, correctly pressurised and lubricated air for consistent sealing and case-handling motion.
Serves as the bench-mounted supply point for lab automation rigs and pneumatic test fixtures, where the 5 um element and low-pressure regulation suit instruments and fittings that need gentler, cleaner air.
Start with the size and port: 200 is the compact step of the GC range, and the G1/4 port here is the G (BSPP) thread option - PT is the standard thread, while G and NPT are catalogue options to order, so match the thread to your piping. Choose the filter grade by air quality needs: 40 um is the standard element and 5 um (code W, fitted here) suits finer protection. Pick the drain type for the filter bowl: manual (as here) needs periodic draining by hand, while automatic and differential-pressure drains handle condensate without operator attention. Select the regulator type and gauge: this unit is the low-pressure type with an external round gauge scaled in psi; embedded square gauges and MPa/bar scales are the other catalogue choices. A mounting bracket is included. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a rated flow number. Send us your application details and we will confirm the flow and sizing figures from the datasheet on request.
The W in the code GC20008MLC2WG selects the optional 5 um element instead of the standard 40 um, giving finer removal of water and particulate. The M selects a manual drain, so condensate collected in the filter bowl is drained by hand rather than automatically - choose automatic or differential-pressure drain versions if you prefer unattended operation.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.