The AirTAC GC200C08MC2K AirTAC F.R.L. Combination, PT1/4, Manual Drain is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C08MC2K is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one set. This configuration is sized for 1/4 in PT ports and carries a 40 um filter element with a manual drain on the filter bowl, a standard regulator with an external round psi gauge for setting downstream pressure, and a built-in reverse/check valve that holds downstream settings when upstream supply is lost. The polycarbonate bowl and included mounting bracket make it a straightforward point-of-use treatment station.
This is a genuine AirTAC part from the GC200 series, one of four sizes (200/300/400/600) covering larger ports and higher flow capacity as the number rises. Options across the series include automatic or differential-pressure drains, a 5 um filter element, alternative gauge scales (MPa/psi/bar) and G or NPT threads. We confirm flow and datasheet figures on request, since AirTAC publishes flow as curves rather than a single rating.
| Model | GC200C08MC2K AirTAC F.R.L. Combination, PT1/4, Manual Drain |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
A point-of-use F.R.L. station feeding impact wrenches, nutrunners and air cylinders at an assembly cell: the filter strips water and swarf from the shop-air drop, the regulator holds a steady setting for consistent tool torque, and the lubricator mists oil to extend tool life.
Treating the air supply to diverters, pushers and clamp cylinders on a packaging conveyor. The check valve holds the regulated downstream pressure through brief supply dips so product-handling strokes stay repeatable, while the manual drain suits a shift-start maintenance check.
Supplying a bench pneumatic press or clamping fixture where clean, regulated and lubricated air protects seals and cylinders. The round psi gauge lets the operator set and verify clamping pressure directly, and the 40 um element guards valve spools from particulate carried in from the plant ring main.
Start with the port and size: this unit is the 200 size with a 1/4 in PT port; step up to 300/400/600 when the application needs a larger port and more flow. Choose the drain to match maintenance routines - manual drain (as here) means an operator opens the bowl drain, while automatic or differential-pressure drains discharge condensate without hands-on attention. Filter grade is 40 um as standard; specify the W option for 5 um where finer particulate removal matters. The gauge here reads in psi; MPa and bar scales are also available, and an embedded square gauge is the standard alternative to this external round gauge. Thread is PT as standard, with G (BSPP) and NPT as order options, and a bracket is included. Because AirTAC publishes flow only as curves rather than a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a rated flow number, Cv or SCFM. Tell us your application and we will confirm the relevant flow and datasheet figures on request before you order.
The M in the code specifies a manual drain on the filter bowl: an operator opens the drain to discharge collected condensate, which suits stations checked on a regular maintenance round. If you prefer hands-off condensate removal, the GC series is also available with an automatic (A) or differential-pressure (blank) drain - just ask for the equivalent model code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.