The AirTAC GC200C08MLF2WG AirTAC 3-Unit F.R.L., G1/4, 5 um, PSI Gauge is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C08MLF2WG is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one conditioning set. This 200-size unit is configured with a G1/4 (BSPP) port, a 5 um filter element for finer water and particulate removal than the 40 um standard, a manual drain on the filter bowl, and a low-pressure type regulator. The embedded square gauge is fitted with a psi scale, and the filter bowl on this size is polycarbonate. The mounting bracket is included.
This is a genuine AirTAC part. The GC family spans 200, 300, 400 and 600 sizes with port options from 1/8 to 1 inch, PT as the standard thread and G or NPT as order options, plus a choice of drain types, filter grades, gauge styles and scales. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GC200C08MLF2WG AirTAC 3-Unit F.R.L., G1/4, 5 um, PSI Gauge |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeds a bench-mounted pneumatic press or clamping fixture where the 5 um element protects precision valves, the low-pressure regulator holds a gentle setpoint, and the lubricator mists the cylinder seals.
Conditions the supply to a cartoning or wrapping line: filtered and regulated air to the PLC-driven valves, oil mist carried downstream to the vacuum generators and gripper cylinders.
A complete filter-regulator-lubricator drop for a single assembly cell or test bench, giving one point of adjustment, a local psi gauge and manual bowl draining at shift checks.
Size and port set the flow path: the 200 size with a G1/4 port is the compact step in the GC range, and larger sizes (300/400/600) carry larger ports for higher demand - match the step to your line's air consumption. This unit already carries the 5 um (W) element; the 40 um standard grade is the alternative if finer filtration is not required. The manual drain means an operator drains the filter bowl periodically; automatic or differential-pressure drains are available on other configurations if unattended drainage matters. The regulator here is the low-pressure type, and its exact adjustment range is not published - confirm it with us if your setpoint is near the limits of a standard unit.
Thread is G (BSPP) on this code; PT is the catalogue standard and NPT is also an order option, so pick the one that matches your plumbing. Gauge scale is psi here (MPa and bar scales exist). Flow for GC units is published as curves, not a single rating, so send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and operating pressure and we will confirm the flow and sizing from the datasheet on request before you order.
The L in the code marks the low-pressure regulator type; its exact adjustment range is not published, so confirm it with us if your setpoint is critical. The M marks a manual drain, meaning the filter bowl is drained by hand at intervals - automatic and differential-pressure drains are available on other GC configurations if you need unattended drainage.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.