The AirTAC GC30010MF2 AirTAC F.R.L. Combination, PT3/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC30010MF2 is an AirTAC GC three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply package for compressed air. This configuration is size 300 with a PT3/8 port, a 40 um standard filter element, a manual drain on the filter bowl, and an embedded square gauge scaled in psi. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi), and the polycarbonate bowls suit the -5 to 70 C (non-freezing) operating range. Maximum working (inlet) pressure is 1.0 MPa (145 psi).
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600, with port sizes from 1/8 to 1 inch, PT as the standard thread and G or NPT as catalogue options, a choice of differential-pressure, automatic or manual drain, a 5 um (code W) filter element where finer filtration is needed, gauge scale choices, and an optional reverse/check valve. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures on request.
| Model | GC30010MF2 AirTAC F.R.L. Combination, PT3/8 |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-10 filter, GR300-10 regulator and GL300-10 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT3/8" · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-10 |
| Build order | Filter → regulator → lubricator |
A filtered, regulated and lubricated supply at each drop point feeds impact wrenches, nut runners and air ratchets along the assembly line, with the psi gauge giving operators a visible setpoint at the station.
On a carton-forming and sealing conveyor, the combination conditions the air feeding cylinders and vacuum generators, keeping moisture and debris out of the valve bank while the lubricator mists the actuator air.
At a CNC machining cell, the unit supplies clean, regulated air to the workholding clamps and chip-blow-off circuit, with the manual drain letting the operator bleed the bowl during shift-start checks.
Size and port step up together: 200, 300, 400 and 600 carry progressively larger ports and higher flow capacity, so match the size to the air demand of the downstream circuit rather than to the pipe alone. For the drain, manual suits installations where an operator can bleed the bowl on a routine; automatic or differential-pressure drain removes that task where the unit is hard to reach. The 40 um element is the standard grade; specify the 5 um (W) option only where finer particulate removal is genuinely required. The embedded square gauge is standard and this code carries the psi scale; MPa and bar scales are also available. PT thread is the standard; order G (BSPP) or NPT where the piping standard differs. A mounting bracket is included with this unit. Because flow is published as curves and not as a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-10 regulator with a GF300-10 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a rated flow number. Tell us your application and air demand and we will confirm the flow and sizing from the datasheet on request before you order.
The M in the code GC30010MF2 selects a manual drain on the filter bowl, which means the bowl is bled by hand on a routine. If you prefer the bowl to discharge without operator action, the GC300 series is also available with automatic (code A) or differential-pressure (blank) drain - ask us for those codes.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.