The AirTAC GC30015F2W AirTAC F.R.L. Combination, PT1/2 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC30015F2W is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply package for compressed air. This configuration is size 300 with a PT1/2 (1/2 in) port, PT thread standard. The filter element is the 5 um grade (code W) for finer water and particulate removal than the 40 um standard, the bowl drains by the differential-pressure method, and the regulator is the standard type with a fitted embedded square gauge reading in psi. The polycarbonate bowls suit this size, and a mounting bracket is included.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, drain type, filter grade, gauge scale and thread (PT standard, G or NPT to order) selectable per code. Flow is published as curves rather than a single rated figure, so ask us to confirm sizing and datasheet figures against your application before ordering.
| Model | GC30015F2W AirTAC F.R.L. Combination, PT1/2 |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-15 filter, GR300-15 regulator and GL300-15 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/2" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-15 |
| Build order | Filter → regulator → lubricator |
Filtered, regulated and lubricated air at a paint booth drop: the 5 um element removes water and particulate ahead of spray equipment, the regulator holds a steady setting and the lubricator mists oil for air tools on the line.
A single point of supply for a packaging line's actuated cylinders and air-driven sealers, where the combination keeps moisture and debris out, holds working pressure steady through shift-long cycles and lubricates the actuators.
Feeding clamps, vices and air-powered fixtures on a machining cell: clean, dry, regulated air protects the clamping circuit while the lubricator keeps cylinders and valves moving smoothly over long production runs.
Size and port are the primary choice: step up from 200 through 300, 400 and 600 as your line flow demand grows - this unit is size 300 with a 1/2 in PT port. Choose the drain method where the unit is installed: differential-pressure (as fitted here), automatic, or manual for attended points of use. Filter grade is 40 um standard or 5 um (code W, fitted here) where downstream equipment needs finer filtration. Gauge scale is selectable as MPa, psi or bar - this code carries the square gauge in psi - and thread is PT standard with G (BSPP) or NPT as order options.
Flow is published as curves, not a single rating, so we cannot quote one number here. Send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-15 regulator with a GF300-15 filter on that branch.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and required flow, and we will confirm sizing against the datasheet on request before you order.
The W in the code GC30015F2W selects the optional 5 um grade, which removes finer particulate and water carryover than the 40 um standard element. It is the right choice where downstream valves, cylinders or process equipment are sensitive to contamination; the 40 um element remains the default on other codes in the series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.