The AirTAC GC30015MF2W AirTAC F.R.L. Combination, PT1/2 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC30015MF2W is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one 300-size set on a PT1/2 (1/2 in) port. The filter element in this configuration is the fine 5 um grade (W), so it strips water and particulate down to 5 um before the air reaches the regulator, which is the standard type with a 0.05-0.9 MPa (7-130 psi) adjustment range. The drain is manual (M), so the bowl is emptied by hand as part of routine maintenance, and the square gauge fitted here reads in psi. The polycarbonate bowls let you see condensate and oil level at a glance, and the set includes a mounting bracket.
This is a genuine AirTAC part. The GC combination is available in 200, 300, 400 and 600 sizes with ports from 1/8 in to 1 in, a choice of PT, G (BSPP) or NPT thread, manual, automatic or differential-pressure drains, 40 um standard or 5 um (W) filter elements, and square or round gauges scaled in MPa, psi or bar. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GC30015MF2W AirTAC F.R.L. Combination, PT1/2 |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-15 filter, GR300-15 regulator and GL300-15 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/2" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-15 |
| Build order | Filter → regulator → lubricator |
Feeding spray guns and air-assisted applicators on a paint line, where the 5 um element, regulated pressure and consistent oil misting protect finish quality across the booth.
Supplying filtered, regulated and lubricated air to tool changers, clamps and chip-clearing cylinders on a machining centre, with the psi gauge giving operators a local pressure readout.
Running carton sealers, case erectors and diverters on a packaging conveyor, where the combination keeps actuators supplied with clean, regulated, lubricated air through a 1/2 in main.
Size and port set the capacity of the set: this 300-size unit carries a PT1/2 (1/2 in) port, one step up from the 200 frame, so choose it when your line's flow demand outgrows the smaller frame. Because flow is published as curves and not a single rating, have us check the curve against your application before you order. The 5 um (W) element suits downstream equipment that needs cleaner air than the 40 um standard grade; the manual drain (M) means an operator drains the bowls on a schedule, so pick the automatic or differential-pressure drain codes instead if nobody is on site to do that. The fitted square gauge reads in psi; MPa and bar scales and an external round gauge are the other catalogue options. Thread is PT as standard, with G (BSPP) and NPT available to order, and the bracket is included.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-15 regulator with a GF300-15 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated number, so we do not quote a figure here. Tell us your application and we will confirm the flow from the datasheet curves on request before you order.
The M in the code GC30015MF2W specifies a manual drain, so condensate in the filter bowl is emptied by hand during maintenance. If you prefer the bowl to discharge itself, the same set is available with an automatic (A) or differential-pressure (blank) drain code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.