The AirTAC GC300C15C2G AirTAC F.R.L. Combination, G1/2 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled as one set. This GC300C15C2G is built for 1/2 in lines with G thread. The filter element is the standard 40 um grade with a differential-pressure drain, the regulator is the standard type with a 0.15-0.9 MPa (20-130 psi) adjustment range, and the set carries an external round gauge with a psi scale. A mounting bracket is included; no reverse/check valve is fitted.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and options such as automatic or manual drains, a 5 um filter element (code W), different gauge scales and G, PT or NPT threads. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures on request.
| Model | GC300C15C2G AirTAC F.R.L. Combination, G1/2 |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-C1 filter, GR300-C1 regulator and GL300-C1 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · See datasheet · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-C1 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to impact wrenches and nutrunners at half-inch assembly stations, keeping tools conditioned across a full shift.
Conditions the air feeding pneumatic cylinders on carton-forming and case-sealing conveyors, where clean, regulated, lubricated air keeps motion consistent.
Supplies workholding clamps and air vices on CNC cells, giving the clamping circuit one point of filtration, pressure setting and lubrication.
Size 300 with a 1/2 in port suits lines where moderate compressed-air volumes feed several downstream devices; step up to size 400 or 600, or down to 200, as your flow demand changes. Choose the drain to match service: differential-pressure (this unit) drains automatically as flow passes, automatic (code A) for continuous duty, manual (code M) where you want drain control by hand. The standard 40 um element covers general protection; specify 5 um (W) for finer filtration needs. The round psi gauge fitted here can be swapped for MPa or bar scales, or an embedded square gauge, at order time. G thread is the ordered option on this unit; PT is the standard thread and NPT is also available. A bracket is included.
Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-C1 regulator with a GF300-C1 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Tell us your line pressure and the air demand of your equipment, and we will confirm the sizing against the datasheet on request before you order.
The differential-pressure drain on this GC300C15C2G discharges collected condensate automatically as air flows through the filter bowl, with no operator action. If your duty cycle leaves long idle periods, an automatic drain (code A) or a manual drain (code M) can be specified instead when ordering the set.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.