The AirTAC GC400C10LC2 AirTAC F.R.L. Combination, PT3/8, Low-Pressure is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC400C10LC2 is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply package. This configuration is the 400 size with a PT3/8 (3/8 in) port, PT thread as standard, a 40 um filter element, and a differential-pressure drain on the filter bowl. The regulator is the low-pressure type, and this code carries a round external gauge reading in psi; a mounting bracket is included.
This is a genuine AirTAC part. The GC family is offered in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and with choices of drain type, filter grade (40 um standard, 5 um optional), gauge scale (MPa, psi or bar), thread (PT standard, G and NPT as order options) and standard or low-pressure regulation. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures on request.
| Model | GC400C10LC2 AirTAC F.R.L. Combination, PT3/8, Low-Pressure |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-C1 filter, GR400-C1 regulator and GL400-C1 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · See datasheet · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-C1 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to the actuated grippers and stopper cylinders on a bottling conveyor, with the lubricator keeping seal wear down through long production shifts.
A point-of-use F.R.L. ahead of a machining centre's pneumatic tool-clamp and chip-clearing circuits, giving the operator a psi gauge at the machine and a bracket for panel fixing.
Supplies the diverters, pushers and clamp cylinders along a carton-packaging conveyor, where the 40 um element protects valves from water and grit and the regulator holds a steady low-pressure setting.
Start with the size and port: 400 is the larger step in the GC range, and the 3/8 in PT port here should match the air line feeding the machine. Choose the drain to suit access: this unit uses the differential-pressure drain (default); automatic (A) or manual (M) are separate codes. The 40 um element is the standard grade; specify W for the 5 um grade where finer particulate removal is needed. Gauge scale is selectable - this code is a round gauge in psi, with MPa and bar scales available. Thread is PT as standard; order G (BSPP) or NPT if your pipework needs it. Note that L marks the low-pressure regulator type, so confirm the required downstream pressure band with us before ordering. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-C1 regulator with a GF400-C1 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated number, so there is no one figure we can quote honestly. Tell us your working pressure and the air demand of the equipment downstream, and we will confirm the sizing from the datasheet curves on request before you order.
L marks the low-pressure regulator type rather than the standard one; the exact adjustment band for this type is not published in the sheet we work from, so confirm your required downstream pressure with us and we will verify it on request. The gauge scale is a real choice too: this code carries a round gauge in psi, and MPa or bar scales are available as separate codes.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.