The AirTAC GC400C10MC2K AirTAC F.R.L. Combination, PT3/8, Manual Drain is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC400C10MC2K is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator supplied as one set. This size 400 configuration carries a 3/8 in PT thread, a 40 um filter element with manual drain, a standard regulator with a 0.05-0.9 MPa (7-130 psi) adjustment range, a round psi gauge, a reverse/check valve and a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi), the working temperature range is -5 to 70 C (non-freezing), and the filter and lubricator bowls are PC (polycarbonate) at this size.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options that include automatic or manual drains, a 5 um filter element (code W), gauges in MPa, psi or bar scales, G (BSPP) or NPT threads, and reverse/check valves. Rated flow is published as curves rather than a single figure, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GC400C10MC2K AirTAC F.R.L. Combination, PT3/8, Manual Drain |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-C1 filter, GR400-C1 regulator and GL400-C1 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · See datasheet · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-C1 |
| Build order | Filter → regulator → lubricator |
Filtered, regulated and oil-misted air for impact wrenches, clamping cylinders and air fixtures at final-assembly stations, with the reverse/check valve guarding the set against backflow in the supply line.
Conditioned air for stopper, pusher and diverting cylinders along carton sealing and case-packing conveyors, with the round psi gauge giving operators a visible setpoint at the line.
Supply conditioning for nail guns, spray guns and air sanders in a joinery or furniture shop, where the manual drain lets operators bleed accumulated water from the filter bowl at the end of each shift.
Choose the size and port by the air consumption of the downstream circuit: GC units come in sizes 200, 300, 400 and 600, stepping up in port from 1/8 in to 1 in, and this size 400 unit with a 3/8 in PT thread suits mid-range circuits. The decodable choices on this family are the filter drain (differential-pressure by default, automatic with code A, manual with code M - this unit is manual), the filter element (40 um standard, 5 um with code W), the gauge (embedded square as standard, external round optional, in MPa, psi or bar scales - this unit carries a round psi gauge), the thread (PT standard, with G and NPT as order options) and the reverse/check valve (code K, fitted here). Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-C1 regulator with a GF400-C1 filter on that branch.
AirTAC publishes flow for the GC series as performance curves rather than a single rated figure, so we do not quote a number here. Send us your required flow and working pressure and we will confirm the sizing from the datasheet on request.
A manual drain (code M) means an operator opens the drain to release accumulated water, which suits attended installations on a regular shift pattern. The GC series is also available with automatic (A) or differential-pressure (default) drains on other configurations. On this manual-drain unit the regulator adjusts from 0.05-0.9 MPa (7-130 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.