The AirTAC GC400C10MC2WG AirTAC F.R.L. Combination, G3/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC400C10MC2WG is an AirTAC GC series three-unit F.R.L. combination: a separate filter, regulator and lubricator supplied as one set. This configuration is built for a G3/8 port, filters to 5 um (the finer of the two published grades), drains by hand through its manual drain, and carries a round gauge reading in psi. The regulator is the standard type with a 0.05-0.9 MPa (7-130 psi) adjustment range, no reverse/check valve is fitted, and a mounting bracket is included. The bowls on this 400 size are polycarbonate; only the 600 size uses aluminium alloy.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, and options for drain type, 40 um or 5 um filtration, gauge scale (MPa, psi or bar), thread (PT standard, with G and NPT as order options) and bracket. Rated flow is published as curves rather than a single figure, so ask us to confirm the datasheet numbers for your application.
| Model | GC400C10MC2WG AirTAC F.R.L. Combination, G3/8 |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-C1 filter, GR400-C1 regulator and GL400-C1 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · See datasheet · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-C1 |
| Build order | Filter → regulator → lubricator |
Filtered, regulated and lubricated air for pneumatic nutrunners, clamps and air cylinders along a vehicle assembly line, with the 5 um grade protecting the downstream tools.
Supply air for cylinder-driven pushers, diverters and sealing heads on a carton packaging conveyor, where the lubricator keeps seals and O-rings working smoothly.
Conditioned air for tool-change cylinders, air chucks and cleaning nozzles on a machining centre, with the regulator holding a steady setpoint at the machine.
Step through the decodable choices in order. Size sets the port and the flow band: 200/300/400/600 map to 1/8 through 1 inch, and this unit sits at 400 with a 3/8 in G thread. Choose the drain to match maintenance habits: manual (as here) drains on demand, while automatic and differential-pressure drains look after themselves. Choose 40 um for general protection or 5 um (this unit) where finer particulate control matters. Gauge scale is selectable (MPa, psi, bar); this one reads psi. Thread: PT is the standard, with G and NPT as order options. One honest note: AirTAC publishes flow as curves, not a single rating, so let us confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-C1 regulator with a GF400-C1 filter on that branch.
AirTAC publishes flow for this series as performance curves, not a single rated number, so we do not quote a figure here. Send us your application details and we will confirm the datasheet flow data for this 3/8 in unit before you order.
The M in this code selects a manual drain: someone opens it to release collected water. The GC series is also available with automatic or differential-pressure drains for unattended installations, and the filter grade can be 40 um standard or 5 um like this unit. Tell us which combination you need.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.