The AirTAC GC400C10MF2 AirTAC F.R.L. Combination, PT3/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC400C10MF2 is an AirTAC three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-preparation set. It cleans compressed air of water and particulate down to 40 um, regulates downstream pressure over 0.05-0.9 MPa (7-130 psi), and adds oil-mist lubrication for downstream pneumatic components. This configuration is size 400 with a PT3/8 (3/8 in) port, PT thread as standard, a manual drain on the filter bowl, a polycarbonate bowl, an embedded square gauge with psi scale, a standard regulator, no reverse/check valve, and a mounting bracket included.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with matching port sizes, and can be ordered with automatic, manual or differential-pressure draining, a 5 um filter element (code W), alternative gauge scales (MPa, psi or bar), G (BSPP) or NPT threads, and gauge or bracket options. Max working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing). Flow is published as curves rather than a single rated figure, so ask us to confirm sizing or any datasheet figure for your application before ordering.
| Model | GC400C10MF2 AirTAC F.R.L. Combination, PT3/8 |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-C1 filter, GR400-C1 regulator and GL400-C1 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · See datasheet · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-C1 |
| Build order | Filter → regulator → lubricator |
Feed spray guns and air-assisted applicators from a single set that removes water and particulate, holds a steady regulated pressure, and meters oil mist to keep gun triggers and air motors working smoothly through a shift.
Supply the cylinders and air cylinders on a case-forming and taping line: clean, regulated and lubricated air keeps clamp-and-seal motions consistent from the first carton to the last, with a manual drain for end-of-shift bleed-down.
Prepare the air feeding pallet clamps, tool-change actuators and air blast on a machining centre, where the regulator holds fixture pressure steady and the lubricator protects the valves and cylinders doing the clamping.
Start with the port and size step: size 400 with a PT3/8 port suits lines plumbed at 3/8 in, and the larger size steps (up to 600) carry higher flow - match the step to your consumption rather than guessing, since flow is published as curves, not a single rating. Choose the drain type: this unit has a manual drain, which suits attended installations where an operator can bleed the bowl; choose automatic draining for unattended duty. The standard element is 40 um; a 5 um element (code W) is available where finer filtration is needed. The embedded square gauge is fitted here with a psi scale; MPa or bar scales and an external round gauge are options. Thread is PT as standard, with G (BSPP) and NPT available to order, and a mounting bracket is included. Ask us to confirm sizing against the application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-C1 regulator with a GF400-C1 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote one number. Tell us your working pressure and air consumption and we will confirm the correct size from the datasheet curves on request before you order.
The M in the code GC400C10MF2 specifies a manual drain on the filter bowl: an operator opens it to release collected water, which suits attended installations. The same series is also available with automatic draining or the default differential-pressure drain - ask us for those codes if your installation runs unattended.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.