The AirTAC GC60020AC2G AirTAC F.R.L. Combination, G3/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60020AC2G is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one set. This configuration is built for a 3/4 inch port with G (BSPP) thread, carries the standard 40 um filter element, and has an automatic drain on the filter bowl, so collected condensate is expelled without manual attention. The regulator is the standard type with a 0.15-0.9 MPa (20-130 psi) adjustment range, and this unit is fitted with an external round gauge reading in psi. At size 600 the filter bowl is aluminium alloy, and a mounting bracket is included.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of ports, threads, drain types, filter grades and gauge scales, so a matching set can be specified for most compressed-air installs. Flow is published by AirTAC as curves rather than a single rated figure; ask us and we will confirm the datasheet figures for this exact model before you order.
| Model | GC60020AC2G AirTAC F.R.L. Combination, G3/4 |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to the clamping fixtures, tool-change actuators and air-powered accessories on a machining centre, with the automatic drain handling condensate on a line that runs through the day.
Conditions the air feeding cylinder-driven filling, capping and labelling stations on a bottling line, keeping the regulator set point stable for consistent actuator stroke timing across the line.
Serves a 3/4 inch main drop on an automotive assembly floor where impact wrenches and pneumatic drivers run continuously; the lubricator delivers oil mist to keep the tools working and the 40 um element stops line-scale reaching them.
Start with the port: this unit is the 600 size on a 3/4 inch G-threaded connection, the largest step in the range - step down to 200/300/400 sizes if your line runs smaller ports and lower air demand. Choose the drain to suit access: automatic (as here) suits installations that are not checked daily, manual suits attended plants, and the differential-pressure default drains on a pressure drop. Filter grade is 40 um as standard; specify the W code for a 5 um element if downstream equipment needs finer filtration. Gauge options are the embedded square gauge or an external round gauge, scaled in MPa, psi or bar - this unit has a round psi gauge. Thread is PT as the catalogue standard with G (BSPP) and NPT as order options; this model is the G version. A bracket is included, and a reverse/check valve can be ordered with the K code.
Because AirTAC publishes flow as curves and not as a single rated number, we do not quote a flow figure here. Send us your application's air demand and we will confirm the sizing against the datasheet curves before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a flow number. Tell us your air demand and line conditions and we will confirm the datasheet flow curves for this exact model on request before you order.
The A in the model code specifies an automatic drain on the filter bowl, so condensate is expelled without anyone opening the drain - useful for installations that are not attended daily. The GC series is also available with a manual drain (code M) or the differential-pressure drain (blank) if you prefer a different arrangement.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.