The AirTAC GC60020F2G AirTAC F.R.L. Combination, G3/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60020F2G is an AirTAC GC600 three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one set. It conditions compressed air in a single install - the filter removes water and particulate down to 40 um, the regulator holds downstream pressure anywhere in its 0.15-0.9 MPa (20-130 psi) adjustment range, and the lubricator adds oil mist for downstream air tools and cylinders. This unit is the 600 size with a G3/4 (3/4 in) G-thread port, differential-pressure drain on the filter, an embedded square gauge with psi scale, and a mounting bracket included. At size 600, the filter and lubricator bowls are aluminium alloy, and the maximum inlet pressure is 1.0 MPa (145 psi) with an operating temperature range of -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC series is available in 200, 300, 400 and 600 sizes with port sizes from 1/8 in to 1 in, PT as the standard thread with G and NPT as order options, 40 um standard or 5 um (W) filtration, differential-pressure, automatic or manual drains, MPa, psi or bar gauge scales, and an optional reverse/check valve. Flow for this size is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GC60020F2G AirTAC F.R.L. Combination, G3/4 |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Installed at the take-off point of a factory compressed-air ring main, the GC60020F2G filters water and scale from the supply, holds a set header pressure for the department, and mists oil into the line for air-powered equipment downstream.
On a bottling or carton-packing line running pneumatic actuators and air cylinders, this three-unit set supplies clean, regulated, lubricated air so the valves and cylinders on the conveyor keep cycling consistently through the shift.
Fed to a machining centre or press shop where clamps, chucks and air tools run off a shared 3/4 in supply, the GC60020F2G removes condensate and particulate, sets the working pressure, and carries oil mist to the tool circuits.
Start with the size and port: 600 is the largest G-series step, and this unit carries a G3/4 (3/4 in) G-thread port - match it against the line size and the flow your system needs, and let us confirm the flow curve before you order. The drain here is differential-pressure, which bleeds accumulated condensate automatically on pressure differential; automatic (A) and manual (M) drains are order options if your duty suits them better. Filtration is the 40 um standard element; specify 5 um (code W) where downstream equipment needs finer air. The gauge is the embedded square type with a psi scale; MPa and bar scales and an external round gauge are alternatives. Thread is G (BSPP) on this code - PT is the standard and NPT is available to order. A mounting bracket is included.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for the GC600 as curves rather than a single rated figure, so we do not quote a rated number. Tell us your line pressure and the flow your application needs, and we will confirm the datasheet curve and correct sizing for this G3/4 unit before you order.
A blank drain position in the GC code means the differential-pressure drain, which discharges collected condensate automatically when the pressure differential across it reaches a set level - no operator attention needed. If your duty calls for it, automatic (A) or manual (M) drain versions can be ordered instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.