The AirTAC GC60020F2W AirTAC F.R.L. Combination, PT3/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC60020F2W is a three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one air-preparation set. This size 600 unit has a PT3/4 port and carries the W filter grade, so the filter element removes water and particulate down to 5 um, with a differential-pressure drain that bleeds accumulated condensate as the pressure differential rises. The standard regulator adjusts outlet pressure across 0.15-0.9 MPa (20-130 psi) and is read on the fitted embedded square gauge with a psi scale, and the lubricator meters oil mist into the downstream air. The 600-size bowls are aluminium alloy, and the set is supplied with a mounting bracket.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with matching port sizes, and options include a 40 um standard element, automatic or manual drains, gauge scale in MPa, psi or bar, and G or NPT thread variants. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rated figure, so ask us to confirm flow and datasheet figures for your application before ordering.
| Model | GC60020F2W AirTAC F.R.L. Combination, PT3/4 |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Feeds a machining centre's pneumatic clamps, tool-change cylinders and air-blast nozzles from one PT3/4 drop, with 5 um filtration protecting the valves and regulated, lubricated air to the actuators.
Sits at the head of a bottling hall's air ring main to condition the supply for conveyor diverters, stopper gates and case-packing cylinders, keeping water and grit out of the line while holding set pressure.
Prepares plant air for impact wrenches, nutrunners and air hoists at an assembly station, delivering filtered, pressure-regulated and oil-misted air so the tools run consistently through a full shift.
Start with the port step: size 600 in PT3/4 is the largest G-series frame, so step up to it when your line's air demand sits above what a 300 or 400 unit carries - match the size to required flow rather than to pipe size alone. Choose the drain to suit access: this unit's differential-pressure drain needs no setting, an automatic drain (code A) suits unmanned installations, and a manual drain (code M) suits attended posts. The 5 um element here is the finer option; the 40 um standard element is the default where general actuation does not need fine filtration. Gauge scale is selectable (MPa, psi or bar) and this unit is delivered with the square psi gauge; thread is PT as standard with G and NPT available as order options, and a bracket is included. Because flow is published as curves and not a single rating, send us your demand figure and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for the GC series as characteristic curves, not as a single rated number, so we do not quote one here. Send us your line pressure and air demand and we will confirm the flow figures from the datasheet for this exact unit before you order.
The W in the code GC60020F2W selects the finer 5 um filter element instead of the 40 um standard, which suits downstream valves and instruments that need cleaner air. The drain position is blank, meaning the differential-pressure drain is fitted as standard: it discharges condensate automatically as the pressure differential across the element rises, with no timer or daily manual draining to manage.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.