The AirTAC GC60020MC2W AirTAC F.R.L. Combination, PT3/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC60020MC2W is an AirTAC GC600 three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-preparation set. It cleans compressed air of water and particulate down to 5 um (the fine W grade, finer than the standard 40 um element), regulates downstream pressure across 0.05-0.9 MPa (7-130 psi) with the standard regulator, and adds oil-mist lubrication for downstream air tools and actuators. This configuration has 3/4 inch PT ports, a manual drain on the filter bowl, a fitted round gauge reading in psi, and no reverse/check valve. The maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). At size 600 the filter bowl is aluminium alloy.
This is a genuine AirTAC part. The GC combination is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 inch to 1 inch, and can be ordered with automatic, manual or differential-pressure drains, 40 um or 5 um filtration, embedded square or external round gauges in MPa, psi or bar scales, and G (BSPP) or NPT threads in place of the PT standard. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC60020MC2W AirTAC F.R.L. Combination, PT3/4 |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Feeds clean, regulated and lubricated air to the tool-changer, clamps and pneumatic actuators on a machining centre, protecting the machine's air circuit from water, chips-grade particulate and wear.
Prepares the air feeding cylinder-driven carton formers, sealers and case packers on a packaging line, holding a stable set pressure while the lubricator keeps cylinder seals and valves running smoothly.
Serves as the main F.R.L. set on a workshop air drop supplying impact wrenches, air ratchets and other lubricated hand tools, with the 5 um element guarding downstream valves from fine contamination.
Size and port step up together: 200, 300, 400 and 600 cover ports from 1/8 inch to 1 inch, so pick the size whose flow curve covers your demand at working pressure - we will check the curve against your application on request. This unit is already set for the 600 size with 3/4 inch PT ports. Drain choices on the filter are manual (as fitted here), automatic, or differential-pressure; manual suits supervised installations where an operator drains the bowl on schedule. Filtration is 5 um on this code (the W grade) versus the 40 um standard - choose 5 um for downstream equipment that needs finer air. The gauge here is the external round type reading psi; embedded square gauges and MPa or bar scales are alternatives. Thread is PT as standard, with G (BSPP) and NPT as order options, and a mounting bracket is included.
Flow is published as curves, not a single rating, so please ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so no single flow number is quoted here. Send us your line pressure and air demand and we will confirm the sizing from the datasheet on request.
In the code GC60020MC2W, the M sets a manual drain on the filter bowl - an operator opens it to expel collected water - and the W sets the 5 um filtration grade, finer than the 40 um standard element. Automatic or differential-pressure drains and the 40 um grade are available on other codes in the same series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.