The AirTAC GC60020MF2 AirTAC F.R.L. Combination, 3/4 in PT is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC60020MF2 is a three-piece AirTAC F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled as one unit that cleans compressed air, holds a set downstream pressure and adds oil mist for air-powered tools and actuators. This configuration is the size 600 body with a 3/4 in PT port, a 40 um standard filter element, a manual drain on the filter bowl, and an embedded square gauge reading in psi. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi), and the filter bowl on this size is aluminium alloy.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with matching port sizes, and options include a 5 um filter element (code W), automatic or differential-pressure drain instead of manual, gauge scale in MPa, psi or bar, an external round gauge, G (BSPP) or NPT threads as order options, and a reverse/check valve. Flow figures are published as curves rather than a single rating, so ask us to confirm the datasheet for your application.
| Model | GC60020MF2 AirTAC F.R.L. Combination, 3/4 in PT |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Feeds impact wrenches, nutrunners and air ratchets at assembly stations, delivering filtered, regulated and lubricated air so tools run smoothly through a full shift.
Conditions the air feeding cylinders on a carton-forming and palletising line, keeping water and debris out of valves while holding a stable set pressure for consistent stroke timing.
Supplies vise and fixture clamping circuits on CNC workstations, where the lubricator protects cylinder seals and the regulator holds clamping force steady part after part.
Start with the size and port: 600 is the largest step in the GC range, matched here to a 3/4 in PT port, and the right choice depends on the air consumption of the downstream circuit - because flow is published as curves rather than a single rated figure, send us your demand and we will confirm sizing before you order. Next, choose the drain: this unit has a manual drain, which suits positions where an operator can bleed the bowl on a routine; automatic or differential-pressure drain versions suit unattended installations. The 40 um element is standard; specify the W code for the 5 um grade where finer particulate removal matters. The embedded square gauge is fitted here with a psi scale; MPa and bar scales and an external round gauge are alternatives. Thread is PT as standard, with G (BSPP) and NPT available as order options, and a mounting bracket is included.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for this series as performance curves rather than a single rated figure, so we do not quote one number. Tell us your line pressure and the air demand of your equipment, and we will confirm the sizing against the datasheet curves before you order.
The GC combines a separate filter, regulator and lubricator, so each element can be serviced or repositioned independently - useful where the lubricator must sit close to the tool circuit. This model has a manual drain; automatic and differential-pressure drain versions are available in the same series if the installation is unattended.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.