The AirTAC GC60025AC2G AirTAC F.R.L. Combination, G1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60025AC2G is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply package. This configuration is the size 600 unit with a G1 (1 in) G-thread port, an automatic drain on the filter bowl, the standard 40 um filter element and a fitted round gauge reading in psi. The regulator is the standard type with a 0.15-0.9 MPa (20-130 psi) adjustment range, and the maximum working (inlet) pressure is 1.0 MPa (145 psi). Because this is the 600 size, the filter bowl is aluminium alloy, and the unit operates in compressed air from -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of drain type (differential-pressure, automatic or manual), filter grade (40 um standard, 5 um with code W), gauge scale (MPa, psi or bar) and thread (PT standard, with G and NPT as order options). Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GC60025AC2G AirTAC F.R.L. Combination, G1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeding a 1 in branch line that serves impact wrenches, nutrunners and clamping fixtures at a set working pressure, with the filter removing water and pipe scale, the regulator holding the setting and the lubricator misting the tools.
Supplying the cylinder and valve network on a high-cycle packaging conveyor, where clean, regulated and lubricated air keeps directional valves and cylinder seals working through continuous shifts.
Conditioning the main air supply at the takeoff from a shop compressor so downstream CNC fixtures, air chucks and pneumatic clamps each receive filtered, pressure-controlled and lubricated air.
Start with the size and port: the 600 series with its G1 (1 in) port is the largest step in the range, so match it against the air demand of the circuit - and have us confirm the flow curve against your application before ordering, since AirTAC publishes flow as curves rather than one rated number. Next choose the drain: this unit has an automatic drain, which discharges condensate without manual attention; manual and differential-pressure drains are the alternatives in the family. The 40 um element is the standard grade; a 5 um element is available with code W where finer particulate capture is needed. The fitted round gauge reads in psi; embedded square gauges and MPa or bar scales are the other gauge choices. Thread is G on this unit, with PT as the standard and G/NPT as order options, and a mounting bracket is included.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for this family as curves rather than a single rated figure, so we do not quote one number. Tell us your application and air demand and we will confirm the flow data from the datasheet and check the sizing with you before you order.
The A in the code gives the filter bowl an automatic drain, which expels collected condensate on its own so no one has to bleed the bowl by hand. The GC family also offers a manual drain and a differential-pressure drain; the 40 um element is standard here, with a 5 um element available as code W.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.