The AirTAC GC60025ALF2 AirTAC F.R.L. Combination, PT1 in is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60025ALF2 is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-treatment set. It filters water and particulate from compressed air down to 40 um, regulates downstream pressure with the low-pressure type regulator, and adds oil-mist lubrication for downstream tools and actuators. This configuration is built for 1 inch PT ports at the large size 600 frame, with an automatic drain on the filter bowl, a fitted embedded square gauge scaled in psi, and an aluminium alloy bowl, which is specific to the 600 size.
This is a genuine AirTAC part. The GC series is also available in sizes 200, 300 and 400 with PC bowls, a choice of port from 1/8 to 1 inch, PT, G or NPT threads, manual or differential-pressure drain options, a 5 um filter grade (code W) and gauge scales in MPa, psi or bar. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures on request.
| Model | GC60025ALF2 AirTAC F.R.L. Combination, PT1 in |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Installed at the point where the 1 inch compressed-air main enters a production hall, the set cleans, regulates and lubricates the whole downstream circuit, with the automatic drain and psi gauge keeping the supply visible and dry without daily attention.
Feeding cylinders, air-driven diverters and pneumatic grippers along a packaging conveyor, the combination keeps moisture and scale out of the valves while the lubricator mists oil to the actuators and the regulator holds a steady low-pressure setting.
Mounted at a heavy-duty tool station served by a 1 inch drop, the unit protects impact wrenches, grinders and air motors from water and debris, delivers controlled low-pressure air where the job demands it, and oils the tools in operation.
Size 600 with PT1 (1 inch) ports is the largest step in the GC range, so start here when your line volume points to a 1 inch supply and step down to 300/400 only if the application is smaller. The automatic drain on this unit handles condensate without manual attention, which suits unmanned or high-duty installations; manual and differential-pressure drain variants exist if you prefer scheduled draining. The 40 um grade is the standard element; specify the W option for 5 um where finer particulate removal matters. The fitted square gauge reads in psi, and MPa or bar scales plus an external round gauge are order options. Thread is PT as standard, with G (BSPP) and NPT available to order, and the mounting bracket is included.
Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote one number. Tell us your line pressure and the flow your application needs, and we will confirm the correct size from the datasheet on request before you order.
This configuration carries code A, the automatic drain, which discharges collected condensate from the filter bowl without manual intervention. If your maintenance routine prefers scheduled draining, the GC series is also offered with manual or differential-pressure drain options in the same sizes and ports.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.