The AirTAC GC60025ALF2G AirTAC F.R.L. Combination, G1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60025ALF2G is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one 600-size set. It filters water and particulate from compressed air down to 40 um, regulates downstream pressure with a low-pressure type regulator, and adds oil-mist lubrication for downstream pneumatic equipment. This configuration has a G1 (1 in) port with G thread, an automatic drain on the filter bowl, an embedded square gauge reading in psi, and a mounting bracket is included. The 600-size bowls are aluminium alloy, and the unit carries a maximum inlet pressure of 1.0 MPa (145 psi) with an operating temperature of -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with matching port sizes, and options include drain type (differential-pressure, automatic or manual), a 5 um filter element (code W), gauge scale (MPa, psi or bar), and PT, G or NPT thread. Flow is published as curves rather than a single rating, so ask us to confirm sizing or any datasheet figure for your application before ordering.
| Model | GC60025ALF2G AirTAC F.R.L. Combination, G1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeding impact wrenches, ratchets and air hoists at assembly stations, where the filter removes water and swarf, the low-pressure regulator sets tool pressure and the lubricator mists oil into the tool air supply.
Supplying filler, capper and seamer cylinders on a high-throughput packaging line, where clean, regulated and lubricated air keeps clamp and pusher cylinders cycling consistently through long production runs.
Conditioning the shop-air feed to a machining centre's tool-change clamp, chip conveyor and pallet-clamp circuits, with the automatic drain handling condensate and the psi gauge giving operators a local setpoint readout.
Start with size and port: the 600 size with its G1 (1 in) port suits the largest air demand in the GC range, while 200/300/400 sizes step down for smaller lines - match the step to your required flow. Then choose the drain: automatic (as fitted here) empties the filter bowl without attention, manual needs operator action, and differential-pressure drains on a set pressure drop. Filter grade is 40 um standard; specify W for the 5 um element where finer filtration is needed. Gauge scale can be MPa, psi or bar (this unit ships with a square psi gauge, and an external round gauge is optional). Thread is G here; PT is the standard and G/NPT are order options. Note the regulator in this unit is the low-pressure type - its exact range is not published, so confirm it with us. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a l/min or SCFM number. Tell us your line pressure and air demand and we will confirm the flow data from the datasheet for this 600-size, G1 (1 in) unit before you order.
The L in the code GC60025ALF2G specifies the low-pressure type regulator rather than the standard one. Its exact adjustment range is not published on the sheet we work from, so please confirm the range with us against your setpoint. Everything else decodes normally: automatic drain, 40 um filter element, square psi gauge and G1 (1 in) G thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.