The AirTAC GC60025F2WGK AirTAC F.R.L. Combination, G1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60025F2WGK is an AirTAC GC600 three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator piped together to clean, regulate and lubricate compressed air in one assembly. This configuration is built around a G1 (1 in) port with G thread, the largest size in the G-series range, and suits a plant-air supply feeding multiple downstream circuits. The filter element is the fine 5 um grade, the bowl on the filter is aluminium alloy (size 600 only), and drainage is by the differential-pressure drain, which bleeds accumulated condensate automatically as the pressure differential across the element builds. The regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi), fitted with an embedded square gauge scaled in psi, and a reverse/check valve is fitted to hold downstream settings if the supply is interrupted. A mounting bracket is included.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of port, thread (PT standard, with G and NPT as order options), drain type, filter grade (40 um standard, 5 um optional), gauge scale (MPa, psi or bar) and reverse valve. Maximum working inlet pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing). Flow is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GC60025F2WGK AirTAC F.R.L. Combination, G1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeding a spray-booth and air-line circuit where the 5 um element, regulated pressure and oil misting protect spray guns and keep finish quality consistent across the shift.
Supplying cleaned, regulated and lubricated air to the cylinders and actuators that drive filling, capping and conveyor stops on a beverage packaging line.
A plant-air service drop for a machining cell, where the check valve holds the downstream setting during supply dips and the lubricator mists air tools and clamping cylinders.
Start with size and port: 200, 300, 400 and 600 step up in port and flow capacity, and this GC600 carries a G1 (1 in) port, so match it against the air demand of the circuit it feeds. Choose the drain type where it applies: differential-pressure (as fitted here) drains automatically as the element loads, while automatic and manual drains are order options. Choose the filter grade: 40 um is the standard element and 5 um (code W, as here) is the finer option for more sensitive downstream equipment. Set the gauge scale to MPa, psi or bar to suit your maintenance team, and specify PT, G or NPT thread to match your piping standard. A bracket is included with this unit, and a reverse/check valve is fitted. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for this family as curves rather than a single rated figure, so there is no one rated flow number we can honestly quote. Tell us your application and we will confirm the datasheet flow figures for this G1 (1 in) unit on request before you order.
The W in the code GC60025F2WGK selects the optional 5 um element; the standard grade is 40 um. The finer 5 um element suits downstream equipment that is more sensitive to particulate, at the cost of a slightly higher pressure drop across the filter. If you prefer the standard grade, ask us for the equivalent 40 um configuration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.