The AirTAC GC60025LF2GK AirTAC F.R.L. Combo, G1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC60025LF2GK is a three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one set for compressed-air lines. This size 600 configuration is built around a G1 (1 in) G-thread port, with a differential-pressure drain on the filter bowl, a standard 40 um filter element, a low-pressure type regulator, an embedded square gauge reading in psi, and a reverse/check valve fitted. The 600-size filter bowl is aluminium alloy, and the mounting bracket is included.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600, with a choice of PT, G or NPT threads, drain types, 40 um or 5 um (W) filter grades, gauge styles and scales, and standard or low-pressure regulator types. Flow figures are published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application on request.
| Model | GC60025LF2GK AirTAC F.R.L. Combo, G1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to spray-booth and paint-line drops, where clean, moisture-reduced air at a stable low pressure protects finish quality on vehicle bodies.
Supplies the palletizer and case-erector air circuits on a bottling line, conditioning the air that actuates grippers, clamps and pushers through a full shift of high-cycle handling.
Conditions the plant air feeding a CNC machining cell, so spindle clamping, tool-change cylinders and chip-conveyor actuators each receive filtered, regulated and lubricated air at the machine.
Start with the port step: this unit is size 600 with a G1 (1 in) G-thread connection, the largest in the GC range, so match it to the line size and the flow your circuit needs. The filter element is the standard 40 um grade; a 5 um element (code W) is available if finer particulate removal is required. Drain choice on the filter bowl is differential-pressure (default here), automatic (A) or manual (M). The regulator in this code is the low-pressure type, and the gauge is the embedded square type reading in psi; an external round gauge with MPa, psi or bar scale is optional. Reverse/check valve (K) is fitted and the mounting bracket is included. Thread is G (BSPP) in this code; PT is the standard thread, with G and NPT as catalogue options to order.
Because flow is published as curves rather than a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for this series as curves, not as a single rated number, so we do not quote a flow, Cv or SCFM figure. Tell us your line size and demand and we will confirm the relevant datasheet curve figures on request before you order.
The L in the code GC60025LF2GK marks the regulator as the low-pressure type rather than the standard type. The exact adjustment range for the low-pressure version is not published in our data, so ask us to confirm it on request. If you need the standard range instead, order the version without the L code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.