The AirTAC GC60025MC2 AirTAC F.R.L. 1 in PT Three-Unit Combo is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC60025MC2 is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one 3-piece set. This configuration is size 600 with a PT1 (1 in) PT-threaded port, a 40 um filter element, a manual drain on the filter bowl, a standard regulator covering 0.05-0.9 MPa (7-130 psi), and an external round gauge with a psi scale. The filter bowl on this 600 size is aluminium alloy. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of port, thread (PT standard; G and NPT are order options), drain type, filter grade (40 um standard, 5 um optional), gauge type and scale, and a reverse/check valve option. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing figures for your application on request.
| Model | GC60025MC2 AirTAC F.R.L. 1 in PT Three-Unit Combo |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeding spray guns and air-assisted applicators on a paint line, where the filter removes water and particulate, the regulator holds a set pressure and the lubricator mists oil into the air stream.
Supplying the pneumatic cylinders and air actuators that index, clamp and divert bottles along a packaging conveyor, with clean, regulated and lubricated air from one 1 in connection.
Running air-operated clamps and workholding fixtures on CNC machining centres, where the three-unit set keeps the supply filtered, holds the clamping pressure steady and lubricates downstream valves and cylinders.
Size 600 is the largest GC size, with a 1 in PT port, so step up or down through 200/300/400/600 to match the port and flow path your line needs. The manual drain on this unit means an operator opens the drain to expel collected water, which suits installations that are checked as part of a routine; choose the automatic or differential-pressure drain codes if you prefer unattended draining. The 40 um element is the standard grade; specify the W code for a 5 um element where finer filtration is wanted. The round external gauge on this unit reads in psi; square embedded gauges and MPa or bar scales are the other catalogue choices. PT is the standard thread; G (BSPP) and NPT are available to order as specifications. A mounting bracket is included with this combination. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not quote one number here. Send us your application details and we will confirm the flow and sizing figures from the datasheet on request.
The M in GC60025MC2 specifies a manual drain on the filter bowl: an operator opens it to expel collected water, which suits installations checked on a routine. The catalogue also offers automatic and differential-pressure drain codes if you want the bowl to discharge without operator action.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.