The AirTAC GC60025MC2GK AirTAC F.R.L. Combination, G1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC60025MC2GK is an AirTAC GC600 three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one working set. It cleans compressed air of water and particulate down to 40 um, regulates downstream pressure within a 0.05-0.9 MPa (7-130 psi) adjustment range, and adds oil mist to keep air tools and cylinders lubricated. This configuration is built around a G1 (1 in) port with G (BSPP) thread, carries a manual drain on the filter bowl, a round gauge reading in psi, and a reverse/check valve fitted. At size 600 the bowls are aluminium alloy, and a mounting bracket is included.
This is a genuine AirTAC part. The GC series spans sizes 200, 300, 400 and 600, with port options from 1/8 in to 1 in, drain choices (differential-pressure, automatic or manual), an optional 5 um filter grade (code W), gauge scale choices (MPa, psi or bar) and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GC60025MC2GK AirTAC F.R.L. Combination, G1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeding spray guns and air-assisted applicators on a paint line, where the filter stage strips water and 40 um particulate, the regulator holds a steady set pressure, and the lubricator mists oil to the air motors.
Supplying the pneumatic cylinders that push, clamp and divert cartons on a packaging conveyor, with the three-unit set cleaning, regulating and lubricating the air so the cylinders cycle consistently through a full shift.
Running clamps and swing cylinders on CNC machining fixtures, where the regulator pins holding pressure to setpoint, the filter protects valve seats from scale and water, and the lubricator keeps actuator seals conditioned.
Start with size and port: the 600 size steps up to a 1 in port for higher air demand, and the G thread here suits G (BSPP) piping; PT is the standard thread with G and NPT available as order options. Choose the drain type to match maintenance routines - manual drain (as fitted here) requires someone to open the drain, while automatic and differential-pressure drains discharge condensate without operator action. The standard 40 um grade suits general plant air; specify the 5 um W grade where finer filtration is needed. Gauge scale is selectable (MPa, psi or bar) - this unit carries a round psi gauge - and the fitted reverse/check valve holds downstream conditions if supply is interrupted.
Be aware that flow is published as curves, not a single rated number, so we cannot quote one figure here. Send us your application's air demand and we will confirm sizing against the datasheet curves before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a number here. Tell us your application's air demand and we will confirm the datasheet flow curves for the GC600 at 1 in porting before you order.
The M in the code GC60025MC2GK specifies a manual drain: condensate collected in the filter bowl is released by opening the drain by hand, which suits lines with regular maintenance rounds. The GC series also offers automatic and differential-pressure drain variants if you prefer unattended condensate discharge.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.