The AirTAC GC60025MLC2K AirTAC 3-Unit F.R.L., PT1 (1 in) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator, built as one set on a common mounting. This GC60025MLC2K is the size 600 unit with a 1 in PT thread. The filter section carries a 40 um element with a manual drain, and the size 600 bowls are aluminium alloy. The regulator is the low-pressure type and this configuration is fitted with a round gauge scaled in psi; a reverse/check valve is also fitted, and a mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC range is published in sizes 200, 300, 400 and 600, with port sizes from 1/8 in to 1 in, G (BSPP) and NPT thread options, automatic, manual or differential-pressure drains, a 5 um filter element (code W) and gauge scales in MPa, psi or bar. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC60025MLC2K AirTAC 3-Unit F.R.L., PT1 (1 in) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeding filtered, regulated and lubricated air to the clutch, counterbalance and part-ejection cylinders on a mechanical stamping press, where the 1 in PT port suits a plant-wide main air ring supplying several presses.
Treating the supply air for banks of pneumatic cylinders, grippers and clamps on an automotive assembly cell: the filter takes out water and swarf, the regulator holds the actuator circuit pressure steady, and the lubricator oil-mists the downstream actuators.
Conditioning air at the manifold feeding heavy pneumatic grinders, chippers and impact wrenches in a shipyard or structural steel shop, where a large-port F.R.L. set serves multiple tool stations off one drop.
The real choices in this series are the size and port step, the drain type, the filter grade, the gauge scale and the thread. Step up from size 200 through 600 (and from 1/8 in to 1 in ports) as your air demand grows; the published flow data is a set of curves, not a single rating, so send us your flow requirement and we will confirm the right size against the datasheet before you order. This unit has a manual drain - if you would rather not rely on someone draining the bowls by hand, the same series can be ordered with an automatic drain or with the default differential-pressure drain. The standard element is 40 um; a 5 um element (code W) suits finer pre-filtration. The regulator in this code is the low-pressure type, and its exact adjustment range is not published in the material we hold, so confirm it with us if your set pressure is critical. Thread is PT as standard, with G (BSPP) and NPT as order options, and a bracket is included with this unit.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Tell us your line pressure, downstream demand and allowable pressure drop, and we will confirm the sizing against the datasheet before you order.
This unit is ordered with a manual drain, so the filter bowl must be drained by hand as condensate collects. If nobody is regularly at the machine, the same GC series can be ordered with an automatic drain, or with the default differential-pressure drain instead - just ask for the alternative code when you enquire.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.