The AirTAC GC60025MLF2K AirTAC F.R.L. Combination, PT1 in, psi Gauge is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC60025MLF2K is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one set. This size 600 configuration carries a 1 inch PT port, a manual-drain filter bowl in aluminium alloy, the standard 40 um filter element, a low-pressure type regulator, an embedded square gauge scaled in psi, and a reverse/check valve fitted. In use, the filter removes water and particulate from the compressed air, the regulator holds a stable downstream pressure, and the lubricator meters oil mist into the line to serve downstream pneumatic tools, cylinders and valves.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600, with port options from 1/8 to 1 inch, PT as the standard thread and G or NPT available as order options, manual or automatic drain, a 5 um (code W) filter element, gauge scale choices, and a reverse/check valve option. Flow is published in the catalogue as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GC60025MLF2K AirTAC F.R.L. Combination, PT1 in, psi Gauge |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeding impact wrenches, nut runners and air ratchets at large assembly stations, where one 1 inch F.R.L. set conditions the air for a bank of tool drops, keeps regulated pressure stable and delivers oil mist to keep the tools running.
Supplying the cylinder- and valve-heavy conveyor and gating circuits of a bottling or canning line, where filtered, regulated and lubricated air keeps diverters, pushers and stopper cylinders cycling shift after shift.
Installed at the take-off of a large-diameter compressed air header in a process plant, conditioning the air before it branches to valve actuators, positioners and pneumatic control panels on a main distribution leg.
Size and port are the first choice: this unit is size 600 with a 1 inch PT port, the largest step in the GC range, so match it to the line size and the air demand of the machines it feeds; smaller 200/300/400 sizes cover lighter duties at smaller ports. Drain type is a real decision: this configuration has a manual drain, which means an operator opens the drain at intervals; if unattended drainage is preferred, automatic-drain and differential-pressure-drain versions exist in the family. The filter element here is the standard 40 um grade; the 5 um W grade is available where finer filtration is needed. The gauge is the embedded square type scaled in psi, with MPa or bar scales and an external round gauge available as options, and the reverse/check valve is fitted in this code. PT is the standard thread; G (BSPP) and NPT are catalogue order options.
One honest note on sizing: catalogue flow is published as curves, not as a single rated number, so send us your application details and we will confirm the datasheet figures before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for this family as performance curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Send us your line size and air demand and we will confirm the datasheet flow figures for this exact model on request before you order.
This code carries M, the manual-drain option: an operator opens the drain on the filter bowl at intervals to remove collected water. If you prefer unattended drainage, the GC family is also available with automatic drain (code A) or the default differential-pressure drain, and the bowl on this size 600 unit is aluminium alloy.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.