The AirTAC GC600C20ALC2K AirTAC F.R.L. Combination, PT3/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C20ALC2K is an AirTAC GC three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one supply package for compressed air. This size 600 unit is built with PT3/4 ports, a 40 um filter element and an automatic drain on the filter bowl, so collected water is expelled without manual attention. The regulator is the low-pressure type, a round gauge scaled in psi is fitted, and a reverse/check valve is included. The filter bowl on this size 600 unit is aluminium alloy, and a mounting bracket is supplied. Maximum working pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC series is also available in sizes 200, 300 and 400 with a choice of ports from PT1/8 to PT1, manual or differential-pressure drains, a 5 um (code W) filter element, square or round gauges scaled in MPa, psi or bar, and G or NPT threads as order options. Rated flow for this series is published as curves rather than a single figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GC600C20ALC2K AirTAC F.R.L. Combination, PT3/4 |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Conditioning the 3/4 in main feed that runs pneumatic impact wrenches, air cylinders and clamping fixtures along an automotive assembly line - water and particles removed, pressure held by the low-pressure regulator, and oil mist carried to the tools.
Supplying lubricated, regulated air to truck service bays where impact guns, air ratchets and lift equipment run off a 3/4 in drop; the automatic drain keeps the filter bowl clear through shift-long compressor cycling.
Feeding the pneumatic pushers, diverters and gripper cylinders on a packaging or bottling conveyor, where the 40 um element protects the valves and the lubricator keeps cylinder seals working over long production runs.
Step up or down through the GC sizes (200/300/400/600) to match the port your main line needs; this unit is the 600 size with PT3/4 threads, and G (BSPP) or NPT can be ordered instead of the PT standard. Choose the drain: automatic (fitted here), manual, or differential-pressure. The standard element is 40 um; a 5 um element (code W) is available where finer filtration is needed. Gauges come as the embedded square type or an external round gauge, scaled in MPa, psi or bar - this configuration carries a round psi gauge. Flow for the series is published as curves, not a single rating, so send us your flow and pressure requirements and we will confirm sizing from the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Tell us your line pressure and the air demand of your equipment, and we will confirm the flow and sizing from the datasheet on request.
This configuration uses the low-pressure regulator type (code L), and the adjustment range for that variant is not published in the standard tables. We will confirm the exact range from the AirTAC datasheet on request before you order.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.