The AirTAC GC600C20C2WG AirTAC F.R.L. Combination, G3/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C20C2WG is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply package for compressed air. This configuration is built around a G3/4 port with G (BSPP) thread, carries the 5 um filter element (the finer of the two catalogue grades, against the 40 um standard), drains each bowl by differential pressure, and is fitted with an external round gauge reading in psi. The regulator is the standard type with a 0.15-0.9 MPa (20-130 psi) adjustment range, and at size 600 the filter and lubricator bowls are aluminium alloy. Maximum working (inlet) pressure is 1.0 MPa (145 psi), with an operating temperature range of -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC line spans sizes 200, 300, 400 and 600, with port sizes from 1/8" to 1", a choice of differential-pressure, automatic or manual draining, 40 um or 5 um filtration, embedded square or external round gauges in MPa, psi or bar scales, and PT (standard), G or NPT threads. Flow is published in the catalogue as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing figures for your application on request.
| Model | GC600C20C2WG AirTAC F.R.L. Combination, G3/4 |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
A filtered, regulated and lubricated supply at each G3/4 drop feeding impact wrenches, nut runners and clamping fixtures on a vehicle assembly line, with the 5 um element protecting downstream tools from water and particulate carryover.
Conditioning the compressed air feeding conveyor diverters, case erectors and carton-sealing cylinders on a packaging line, where stable regulated pressure and consistent oil mist keep high-cycle actuators running shift after shift.
A three-unit F.R.L. point on the main air header of a textile mill, supplying looms and air-jet equipment through a G3/4 connection, with the fine 5 um grade and psi gauge suiting instrument-adjacent pneumatic circuits.
Start with the port step: size 600 with its G3/4 connection sits at the top of the GC range (1/8" to 1" across sizes 200-600), so pick the size whose flow curve covers your demand rather than oversizing on port alone. This unit already carries the 5 um element; if your lines tolerate the standard 40 um grade, that variant is available in the same frame. Draining here is differential-pressure (the default); automatic and manual drains are the other catalogue choices. The round gauge on this unit reads psi; square embedded gauges and MPa or bar scales are also offered. Thread is G (BSPP) as ordered, with PT as the standard and NPT available as an option. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated number, so there is no one l/min or SCFM figure we can quote. Send us your line pressure and air demand and we will confirm the flow and datasheet figures for this exact G3/4 configuration on request.
The trailing G in the model code orders the G (BSPP) thread variant of the G3/4 port. PT is the catalogue default thread, and NPT is also available as an order option - these are specification choices made when ordering, not a statement about delivery.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.