The AirTAC GC600C20F2 AirTAC F.R.L. Combination, PT3/4, 40 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C20F2 is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one treatment train. This 600-size unit is fitted with PT3/4 ports (PT thread is the standard; G and NPT are order options), 40 um standard filtration and a differential-pressure drain on the filter bowl. The regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi), and a square gauge graduated in psi is fitted so set pressure can be read directly at the unit. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). At size 600 the filter bowl is aluminium alloy, and a mounting bracket is included.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of ports, drain types (differential-pressure, automatic or manual), filter grades (40 um standard, 5 um optional), gauge styles and scales, and G or NPT threads as order options. Flow is published by the manufacturer as curves rather than a single rated figure, so if you need a datasheet or a sizing check against your air demand, ask us and we will confirm the figures on request.
| Model | GC600C20F2 AirTAC F.R.L. Combination, PT3/4, 40 um |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Feeding filtered, regulated and lubricated air to the tool-changer, clamping fixtures and pneumatic actuators on a CNC machining centre, with the psi gauge letting setters verify clamping pressure at the unit.
Supplying treated air to the cylinders and vacuum generators on a carton-forming and case-sealing conveyor line, where the 40 um filter protects valves and the lubricator keeps cylinder seals working over long shifts.
A 3/4-inch drop from the main ring main serving a multi-station assembly cell, giving each cell its own water and particulate removal, a set regulated pressure and oil-mist lubrication for air tools.
Start with the port and size step: this unit is size 600 with PT3/4 ports, the largest step in the GC range, so match it to the line diameter and the air demand of the tools and actuators downstream. Choose the drain type for the filter bowl - differential-pressure (as fitted here) drains automatically on a pressure differential, the automatic option drains on a timed or level basis, and the manual option is drained by hand. Choose the filter grade: 40 um is standard for general plant air, while the 5 um option (code W) suits finer downstream equipment. Select the gauge style and scale (square embedded or external round; MPa, psi or bar) and the thread: PT is the standard, with G (BSPP) and NPT as order options. Flow is published as curves, not a single rated number, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Tell us your air demand and line conditions and we will confirm the sizing from the datasheet on request before you order.
This unit's filter bowl uses the differential-pressure drain, the default option: condensate is discharged automatically when the pressure differential across the drain reaches its threshold, with no manual intervention. If you prefer, the same series can be ordered with an automatic drain (code A) or a manual drain (code M); note that the regulator adjustment range differs by drain type - 0.15-0.9 MPa (20-130 psi) with the differential-pressure or automatic drain, and 0.05-0.9 MPa (7-130 psi) with the manual drain.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.