The AirTAC GC600C20F2G AirTAC F.R.L. Combination, G3/4 Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C20F2G is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one set for compressed air. This 600-size unit is threaded G3/4 (BSPP), filters to the standard 40 um grade and uses a differential-pressure drain on the filter bowl. The regulator is the standard type, adjustable from 0.15 to 0.9 MPa (20-130 psi), with an embedded square gauge scaled in psi fitted. The bowls on this 600 size are aluminium alloy, the maximum inlet pressure is 1.0 MPa (145 psi), the working temperature range is -5 to 70 C (non-freezing), and a mounting bracket is included.
This is a genuine AirTAC part. The GC series is available in 200, 300, 400 and 600 sizes covering ports from 1/8 to 1 inch, with options including a 5 um filter element (code W), automatic or manual drains, gauge scales in MPa, psi or bar, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm datasheet figures for your application.
| Model | GC600C20F2G AirTAC F.R.L. Combination, G3/4 Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Installed at a main air drop in an automotive or general manufacturing plant, the set filters water and particulate from the compressed air, holds a set working pressure for downstream tools and circuits, and carries oil mist to pneumatic equipment on the line.
Mounted at the inlet to a carton-sealing or case-packing conveyor section, the combination conditions the air feeding sealing cylinders and pushers: clean, moisture-reduced air at a stable regulated pressure with lubrication for the actuators.
Fitted at the air inlet of a CNC machining cell, the set supplies the tool changer, clamps and pneumatic actuators with filtered, regulated and lubricated air, protecting the machine's air-side components from water and debris in the supply.
Size and port step up with required flow: 200 through 600, with this unit at the 600 size on G3/4. The filter drain is differential-pressure as standard here; automatic (A) and manual (M) are the alternatives, and the regulation range differs by drain type - 0.15-0.9 MPa (20-130 psi) for automatic and differential-pressure drains, 0.05-0.9 MPa (7-130 psi) for manual. Filter grade is 40 um standard, 5 um with code W. Gauges are embedded square as standard with an optional external round gauge in MPa, psi or bar scales; this unit carries the square gauge in psi. Thread is PT as standard, with G (BSPP) and NPT as order options - this unit is specified with G. Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
Flow for the GC600 series is published as curves in the AirTAC datasheet rather than as a single rated figure, so we do not quote a number here. Tell us your application and required flow, and we will confirm the figures and sizing from the datasheet on request.
GC combines a separate filter, regulator and lubricator, so each element can be serviced or replaced independently; the two-piece GFC alternative pairs a filter-regulator with a lubricator instead. The trailing G in GC600C20F2G is the thread: G (BSPP) at 3/4 inch. PT is the standard thread for the series, and G or NPT are catalogue options to order.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.