The AirTAC GC600C20LC2G AirTAC F.R.L. 3-Unit G3/4 Low-Pressure is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C20LC2G is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled into one conditioning station. This size 600 configuration is built for G3/4 (BSPP) ports and carries the low-pressure regulator variant, a standard 40 um filter element, a differential-pressure drain on the filter bowl, and a round pressure gauge reading in psi. The bowl on the 600 size is aluminium alloy, and a mounting bracket is included.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with port options from 1/8 to 1 inch, and choices of drain type, filter grade (40 um standard, 5 um optional), gauge style and scale, thread (PT standard, G and NPT to order) and reverse/check valve. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GC600C20LC2G AirTAC F.R.L. 3-Unit G3/4 Low-Pressure |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
A single conditioning station feeding the cylinders and air valves on a mechanical stamping or forming press, where the filter removes water and particulate, the regulator holds working pressure steady and the lubricator mists oil to the actuation circuit.
Conditioned air for carton formers, case sealers and pick-and-place cylinders on a packaging conveyor line, keeping moisture and debris out of the valves while delivering lubricated air to high-cycle pneumatic actuators.
Filtered, regulated and lubricated air to workpiece clamps, air chucks and air tools in a CNC machining cell, where stable regulated pressure protects the clamping sequence and oil mist extends cylinder and tool life.
Choose the size and port against the air demand of your circuit: this unit is size 600 with a G3/4 port, the largest step in the range. The filter element is the standard 40 um grade (a finer 5 um W grade is available on other codes), and the bowl drains by differential pressure, which clears condensate as the pressure drop across the element rises; automatic and manual drains are alternatives on other codes. The regulator here is the low-pressure type, and the fitted round gauge reads in psi, with MPa and bar scales available as alternatives. The thread is G (BSPP); PT is the standard thread and NPT can be ordered. Because flow is published as curves rather than a single rating, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the datasheet figures and check this size 600, G3/4 unit against your air demand before you order.
This unit carries the L low-pressure regulator variant, and the exact adjustment range for that variant is not published in our data sheet. Tell us your working pressure and we will confirm the range from the AirTAC datasheet on request. Maximum inlet pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C, non-freezing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.