The AirTAC GC600C20LC2GK AirTAC F.R.L. Combination G3/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC series is a three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator built up as one set. This GC600C20LC2GK is the size 600 unit for 3/4 in ports with G (BSPP) thread, fitted with 40 um filtration, a differential-pressure drain on the filter bowl, a low-pressure regulator with an external round gauge reading in psi, a reverse/check valve, and a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC range is offered in sizes 200, 300, 400 and 600, with port sizes stepping from 1/8 in up to 1 in, PT thread as standard and G or NPT as order options, plus a choice of drain type, 40 um or 5 um (W) filtration, gauge style and scale. At size 600 the filter bowl is aluminium alloy. Rated flow is published as curves rather than a single figure, so ask us to confirm the datasheet for your line size before ordering.
| Model | GC600C20LC2GK AirTAC F.R.L. Combination G3/4 |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Conditioned air for spray guns and air-assisted applicators: the filter removes water and particulate before the low-pressure regulator holds a gentle setting, the lubricator mists oil to the gun, and the round psi gauge sits in view at the drop.
A full F.R.L. set ahead of the machine's pneumatic valves and clamps: 40 um filtration cleans the plant air, the regulator sets working pressure, the lubricator feeds the actuators, and the check valve holds the circuit if supply dips.
Filtering, regulating and lubricating the air feeding conveyor diverters, case sealers and bagger cylinders, with the round gauge letting operators verify line pressure at a glance during changeover.
Match the series to the flow your line needs: sizes step from 200 to 600, and this 600 unit carries a 3/4 in port. The real, decodable choices on this family are drain type on the filter (differential-pressure as here, automatic, or manual), filter grade (40 um standard, 5 um with code W), gauge style and scale (embedded square or external round; MPa, psi or bar - this unit carries a round psi gauge), thread (PT standard; G or NPT to order) and bracket. The L in the code marks the low-pressure regulator type; its exact adjustment range is not published, so confirm it with us against your setpoint. Flow is published as curves, not a single rating - ask us to check sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Tell us your line size and application and we will confirm the flow figures from the datasheet on request.
It marks the low-pressure regulator type. This set regulates to lower settings than the standard type; the exact adjustment range for the low-pressure version is not published in the catalogue, so ask us to confirm it for your setpoint. The round gauge fitted on this unit reads in psi.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.