The AirTAC GC600C20LC2WGK AirTAC F.R.L. Combination Unit G3/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-preparation station. This GC600C20LC2WGK is the size 600 unit with a G3/4 (3/4 in) G-thread port, the 5 um filter element (code W), a differential-pressure drain on the filter bowl, the low-pressure (L) regulator type, a round gauge scaled in psi, a reverse/check valve fitted and the mounting bracket included. The size 600 filter bowl is aluminium alloy.
It is a genuine AirTAC part for compressed air, rated to 1.0 MPa (145 psi) maximum working pressure and -5 to 70 C (non-freezing). The GC line spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options for drain type, 40 um or 5 um filtration, gauge style and scale, PT, G or NPT threads and a reverse/check valve. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GC600C20LC2WGK AirTAC F.R.L. Combination Unit G3/4 |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Feeding filtered, regulated and lubricated air to the clamp and ejector cylinders on a stamping-cell fixture bank, with the 5 um element helping protect directional valves and tight-tolerance actuators.
Supplying the stopper, lift and pusher cylinders along a bottling-hall conveyor, where the lubricator maintains an oil mist for cylinder and valve seal life across long production shifts.
Running quarter-turn pneumatic actuators on a treatment-plant valve skid, with the low-pressure regulator holding a gentle set pressure and the reverse/check valve preventing backflow through the station.
Choose the size by port and demand: size 600 with a 3/4 in port sits at the top of the GC range for higher-flow lines, while sizes 200/300/400 step down in port and capacity. Drain options on the filter are differential-pressure (this unit, the default), automatic (A) or manual (M). Filtration is 40 um standard or 5 um (W, this unit) where downstream equipment needs finer air. Gauges are the embedded square type or an external round gauge with MPa, psi or bar scales - this unit carries the round psi gauge. Thread is PT as standard, with G (this unit) and NPT as catalogue options; the low-pressure (L) regulator type is a decodable variant of this series whose exact adjustment range is not published, and we confirm it on request. Because flow is published as curves rather than a single rating, send us your air demand and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Tell us your line demand and we will confirm the flow and the full datasheet figures for GC600C20LC2WGK on request.
L is the low-pressure regulator type of the GC series. Standard GC units with differential-pressure or automatic drain adjust 0.15-0.9 MPa (20-130 psi), while manual-drain units adjust 0.05-0.9 MPa (7-130 psi). The exact adjustment range of the low-pressure type is not published in our sheet, so we confirm it on request before you order.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.