The AirTAC GC600C20LF2W AirTAC F.R.L. Combination, PT3/4, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled into one supply unit. This GC600C20LF2W is built in the 600 size with 3/4 in PT ports, carries the 5 um filter grade (code W), a differential-pressure drain on the filter bowl, a low-pressure type regulator and an embedded square gauge scaled in psi. At size 600 the bowls are aluminium alloy, and the set includes a mounting bracket.
This is a genuine AirTAC part for compressed air, rated for up to 1.0 MPa (145 psi) inlet and -5 to 70 C, non-freezing. The GC range spans sizes 200 to 600 with ports from 1/8 to 1 in, and options including thread (PT standard, with G and NPT as catalogue options), filter grade (40 um standard, 5 um optional), drain type and gauge scale. Rated flow is published as curves rather than a single figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GC600C20LF2W AirTAC F.R.L. Combination, PT3/4, 5 um |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Feeds spray guns and air-assisted applicators on a finishing line, where the 5 um element, low-pressure regulation and oil misting support finish quality and gun life.
Supplies filtered, regulated and lubricated air to clamps, grippers and cylinders on an automated assembly cell fed from a 3/4 in main.
Serves maintenance-bay outlets where impact wrenches, blow guns and test rigs run off a 3/4 in drop and need clean, regulated, oiled air.
Size and port are the first decision: GC sizes 200, 300, 400 and 600 step up in port and flow capacity, and this unit is the 600 size on 3/4 in PT thread. From there the decodable choices are the filter grade (40 um standard or 5 um, which this unit carries), the drain type (differential-pressure as fitted here, with automatic and manual as alternatives), the gauge (embedded square as standard, external round optional, scaled in MPa, psi or bar - psi here), and the thread (PT standard, G or NPT as catalogue options). Note that this is the low-pressure regulator type; its set range is not published as a single figure, so confirm it with us. Because flow is published as curves rather than one rated number, send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Tell us your required flow and working pressure and we will confirm the sizing from the datasheet on request.
This unit carries the W filter grade, a 5 um element, instead of the 40 um standard, for finer water and particulate removal. The filter bowl uses the differential-pressure drain, the default option in the GC range; automatic and manual drains are available as alternative configurations on other codes.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.