The AirTAC GC600C20MC2 AirTAC F.R.L. Combination, PT3/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600C20MC2 is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator supplied as one set, covering filtration (water and particulate removal), pressure regulation and oil-mist lubrication. This 600-size unit is threaded PT3/4 and is configured with a manual drain on the filter bowl, a 40 um standard filter element, and an external round pressure gauge reading in psi. At size 600 the filter bowl is aluminium alloy. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi), and a mounting bracket is included.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with ports from 1/8 in. to 1 in., and with choices of drain type, 40 um or 5 um (W) filtration, gauge type and scale (MPa, psi or bar), and G (BSPP) or NPT thread in place of the PT standard. Maximum inlet pressure is 1.0 MPa (145 psi) and operating temperature is -5 to 70 C (non-freezing). Flow for this combination is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application.
| Model | GC600C20MC2 AirTAC F.R.L. Combination, PT3/4 |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
Installed at a 3/4 in. main drop to condition the air feeding pneumatic impact wrenches, air ratchets and clamping fixtures, removing water and particulate, holding a set working pressure and carrying oil mist to the tools.
Mounted at the machine inlet to prepare compressed air for pneumatic vices, tool-clamp cylinders and chip-blowing jets, with the regulator set to the pressure the machine builder specifies and the lubricator feeding actuated components.
Placed on the supply to a packaging conveyor's air cylinders and vacuum generators, so the actuators receive clean, regulated, lubricated air through a 3/4 in. line sized for the whole machine.
The primary choice is size: 200, 300, 400 and 600 step up in port size and flow capacity, so size the unit to the air demand of the line rather than to the pipe alone - this code is the 600 size with a 3/4 in. PT port. The filter element here is the 40 um standard grade; the 5 um (W) grade is the option where finer particulate removal is needed. Drain type matters in service: this unit has a manual drain that needs periodic attention, while automatic and differential-pressure drain versions are available on other GC codes. The gauge on this code is the external round type reading in psi; an embedded square gauge and MPa or bar scales are the alternatives. Thread is PT as standard, with G (BSPP) and NPT as order options, and a mounting bracket is included. Because AirTAC publishes flow as curves rather than a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Send us your required flow and working pressure and we will confirm the datasheet figures for this exact 600-size, PT3/4 configuration before you order.
This code carries M, meaning a manual drain: the filter bowl must be drained periodically as condensate collects. If you prefer hands-off condensate removal, GC codes with an automatic drain (A) or the differential-pressure drain (no drain letter) are available - the manual-drain version also gives the widest regulator adjustment range of 0.05-0.9 MPa (7-130 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.