The AirTAC GC600C20MC2G AirTAC F.R.L. Combination, G3/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator, assembled as one coordinated set. This GC600C20MC2G is built in the size 600 frame with a G3/4 (BSPP) port. The filter element is the standard 40 um grade and its bowl is aluminium alloy at this size, with a manual drain you open by hand to dump collected water. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi), and the set carries a round pressure gauge reading in psi. A mounting bracket is included.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600, with port options, thread choices (PT standard, G and NPT to order), drain types, 5 um filtration (code W) and gauge scales available across the range. Flow is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GC600C20MC2G AirTAC F.R.L. Combination, G3/4 |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-C2 filter, GR600-C2 regulator and GL600-C2 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · See datasheet · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-C2 |
| Build order | Filter → regulator → lubricator |
A dedicated F.R.L. set feeding the pneumatic actuators, tool-clamp circuits and chip-ejection cylinders of a CNC machining centre, with the regulator set to the machine's specified supply pressure and the manual drain emptied at each shift check.
Conditioned air for the clamp, pusher and lift cylinders on a bottling or packaging line: the 40 um element stops particulate reaching the valves, the regulator holds a stable setting through the shift, and the lubricator mists oil for the cylinder seals.
A wall-mounted supply point for impact wrenches, riveters and air ratchets in a vehicle or equipment assembly bay, where lubricated air protects the tool motors and the manual drain is dumped during end-of-day housekeeping.
Start with the port step: size 600 with a 3/4 in port suits lines whose demand sits at the top of the G-series range, while 200/300/400 cover smaller feeds - size up rather than down if your flow demand is high. For the drain, manual suits installations on a maintenance schedule; automatic or differential-pressure drains suit unattended duty. Filtration is 40 um as decoded here; choose the W option only where 5 um is genuinely required. The round psi gauge is fitted on this unit; MPa and bar scales and the embedded square gauge are the other catalogue choices. Thread is G (BSPP) here, with PT as the standard and NPT as an order option, and the bracket is included.
One honest note before you order: AirTAC publishes flow as curves, not as a single rated number, so we cannot quote you a rated flow figure. Send us your application details and we will confirm the sizing against the datasheet curves on request.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-C2 regulator with a GF600-C2 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so there is no one rated flow number we can honestly quote. Tell us your line pressure, port size and the demand of the equipment you are feeding, and we will confirm the sizing against the datasheet curves on request.
The M in this model code specifies a manual drain on the filter bowl: collected water is released by opening the drain by hand, which suits stations checked on a fixed maintenance round. The GC family is also catalogued with automatic and differential-pressure drains for unattended installations, and the gauge scale and thread (PT standard, G or NPT to order) are likewise decodable choices.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.